16
Shui Mu University, Department of Materials Science, Metallurgy Laboratory.
Wang Xu had been busy here for two days since Wang Fei flew to Xiangjiang a few days ago. The operating steps provided by the system were very detailed, and Wang Xu didn't make any modifications because he didn't understand them.
But he still got some advantages; the method given by the system actually required some new equipment. Some could be processed, so Wang Xu just placed an order at the school's factory, which cost a few hundred yuan.
However, many aspects of control were more troublesome. It wasn't that they couldn't be done, but they would take too long and required imported equipment like high-precision servo motors. Wang Xu, working alone, simply couldn't handle it all.
So, Wang Xu decided to do it by hand, using his highly perceptive and controllable hands to replace those control devices. It would just mean trying a few more times.
First, he would produce the finished product, and then he expected interested organizations would come seeking cooperation.
With his experience in Automation from his previous life and his skills in this life, Wang Xu was essentially equivalent to an engineer with over a decade of work experience.
Even in mechanics, computer science, and even mathematics and physics, he could boast, but the materials major was precisely outside his skill set.
Therefore, he could only follow established practices and dared not deviate in the slightest.
The senior student in the Department of Materials Science was Cao Lei, Professor Bian's doctoral student, who enrolled last year. However, he had been at Shui Mu for his bachelor's and master's degrees, and in this very laboratory, so he was quite familiar with the equipment here.
At that time, many master's and doctoral students advanced directly like this; it was almost the norm in all universities. If a promising candidate was encountered, they would be kept as much as possible, as the talent gap was truly severe.
In the 1980s, many universities couldn't even gather enough experimental teachers to teach equipment usage, because most teachers never had the opportunity to access such equipment.
After more than ten years since the resumption of the college entrance examination, only a few doctoral students had graduated in total, and many of the earlier doctoral students were substandard. Therefore, a doctoral student like Cao Lei, who had received a complete and formal undergraduate and master's education, still commanded considerable respect.
Cao Lei was from Hubei Province and was almost 30 this year, with a child already in elementary school. His middle school years were delayed by that period, and he went to the countryside to farm.
After the resumption of the college entrance examination, he resumed his studies, took the exam three times, and finally got into Shui Mu, making him a legendary figure of his generation.
Senior Brother Cao was a very kind person. He wasn't a talkative person, but once he started discussing equipment, he would chatter endlessly. In those days, all kinds of equipment were very precious, and he had almost memorized all the operation manuals.
With such an equipment-specialized senior brother guiding him, Wang Xu's progress was quite smooth.
The delicate operations of the metallurgical process were mostly controlled by machinery and equipment, and they were not too difficult to use, at least for Wang Xu.
The difficulty actually lay in the use of specific new equipment, because that relied on Wang Xu's feel, and feel, for this kind of thing, still required constant attempts.
Fortunately, the experiment proceeded quite smoothly. After several attempts, Wang Xu was able to successfully use his special touch to draw extremely fine conductive wires.
After a few more adjustments, Wang Xu's experiment was completed very smoothly, taking less than two days in total.
The next two days were more about manufacturing than experimenting. Wang Xu wanted to produce a certain quantity; although it couldn't be made into actual wires yet, it could still be used for internal circuits.
Oxygen-free copper can be used in almost all aspects of electronic circuits, with extremely low resistivity and excellent signal-to-noise ratio, especially for audio and video equipment.
The finished product had already been handed over to Professor Bian, and its significantly reduced resistivity aroused his great interest. Even Wang Xu, an outsider, knew what a 10% reduction in resistance meant, let alone Professor Bian, who had worked with metals his entire life.
This improvement based on oxygen-free copper had already reached China's ceiling. Professor Bian highly suspected that this was no longer ordinary oxygen-free copper.
This was very likely a type of oxygen-free copper that had been developed abroad for decades but had always been an industrial blank in China. Its name was Single Crystal Copper.
So, Professor Bian rushed to the laboratory almost immediately; he had to talk to this student right away.
Confirming Single Crystal Copper required specialized testing, which Professor Bian assigned to Cao Lei for further analysis and testing.
Single Crystal Copper was actually born in the 1950s. Its conductivity can approach that of silver, and its excellent toughness makes it an extremely superior conductive material.
However, the processing method for this material has always plagued the industry. Previously, it was mainly used for chip leads and internal connections, but processing wires and commercializing them remains a challenge even in the West.
This Single Crystal Copper wire requires a new technology and equipment called hot-type continuous casting. This technology was invented by Japan in the coming years, so until recently, there has been no news of such wires on the market.
This technology, in simple terms, is a new material forming technology developed on the basis of advanced continuous casting technology and directional solidification technology.
The fundamental difference from traditional continuous casting is the use of a heated mold to prevent the formation of crystal nuclei on the mold wall. Directional solidification conditions are formed by end-cooling, causing the molten metal to solidify into shape the moment it exits the mold.
It sounds simple, but almost every detail requires extensive experimentation to determine the final parameters, and the parameters influence each other, with situations where one change affects the entire system being commonplace.
And how to adjust the parameters, how to adjust them, what is the principle, why adjust them this way—the knowledge involved is profound, and it often tests metaphysics.
The birth of many materials seems inexplicable, with various blunders emerging endlessly. It's very common to aim for A and end up with B.
Moreover, these things are the core technologies of various enterprises; they won't even apply for patents. Many times, you don't even have a 《Reference》.
As a result, designing material processes can consume money faster than directly burning it, like throwing money into water without even a splash.
Anyway, Wang Xu wouldn't dare. If it weren't for the system, Wang Xu wouldn't touch materials even if it killed him. Why else would materials be called a bottomless pit? It doesn't just trap college students; countless bosses have been ruined by materials.
The sample has already been given to Senior Brother Cao by Professor Bian for various tests, at least to determine if it is truly Single Crystal Copper, as well as various parameters such as resistivity, signal-to-noise ratio, and flexibility.
And Professor Bian is currently watching nearby, as Wang Xu is manually drawing an extremely fine copper wire on a self-made device.
Wang Xu's hand was very steady, but he knew himself that his hand was actually trembling slightly. This trembling was to constantly adjust parameters such as the pulling force, speed, and angle; everything relied on feel.
After all, it was temporarily processed equipment, and both the processing accuracy and assembly situation could only be described as barely satisfactory. Everything else relied on Wang Xu's hands.
If there were a skill level for wire drawing technicians, Wang Xu would undoubtedly be a leader among them, easily qualifying as an eight-grade worker.
