16
Geim, of course, had to review this Doctoral student's results. He then discovered that the graphite patch at the bottom of the petri dish provided by the student was a whopping 10 micrometers thick!
What does 10 micrometers mean? That's equivalent to the thickness of 1000 layers of Graphene!
What he wanted was Graphene as thin as possible. Even if it didn't reach the level of a single layer, it should at least be a few dozen layers, right?
What's the meaning of giving me 1000 layers of Graphene?
Naturally, Geim was dissatisfied and demanded the Doctoral student continue polishing it thinner.
The Doctoral student essentially gave up, saying, 'Then you'll have to give me another piece of Highly Oriented Pyrolytic Graphite.'
The key point was, even if he were given another piece of Highly Oriented Pyrolytic Graphite, the Doctoral student couldn't guarantee how thin he could polish it.
Just the cost of one piece of Highly Oriented Pyrolytic Graphite was over $300.
No matter how rich Geim was, he absolutely wouldn't let a Doctoral student waste resources like that.
There was no other way. After all, with the technology at the time, polishing Highly Oriented Pyrolytic Graphite down to the atomic scale was as difficult as ascending to heaven.
So, the Doctoral student simply quit, dropping the task entirely.
Geim had to roll up his sleeves and do it himself.
On one hand, it was to save costs; on the other, it was an expression of dissatisfaction with his subordinates.
Coincidentally, before starting to polish, he saw a student sticking Transparent Tape onto the graphite surface.
Geim was very curious and asked the student why they did that.
In his view, this action was completely meaningless. Since the outermost layer was going to be polished off anyway, what was the point of using tape?
The student said the tape could peel off a dirty layer of graphite from the surface, allowing them to polish from a cleaner surface, which would be more convenient.
No one knows exactly what the student was thinking, but it sparked a brilliant idea in Geim's mind.
He had a sudden inspiration: he placed the tape that had peeled the graphite surface under a Microscope for observation.
One look was all it took. Geim discovered that the thickness of the graphite layer on this tape was actually much thinner than the graphite flakes the Doctoral student had painstakingly polished earlier!
However, the graphite thickness on the tape was uneven. Thick areas could be much thicker, but the thinnest parts were only a few dozen atomic layers thick.
Geim noted that graphite actually possesses a complete layered cleavage property. Theoretically, it could indeed be peeled off layer by layer.
From this theory, it wasn't particularly difficult to understand that graphite layers could adhere to the Transparent Tape after contact.
And then came Geim's ingenious maneuver.
He folded the tape directly, stuck it together and pulled it apart. The result was that both ends of the tape had graphite layers attached, and these layers had become even thinner.
This discovery thrilled Geim. He repeated the process many times.
When the graphite layer on the tape became as thin as a single Carbon Atom in thickness, the graphite layer transformed into Graphene.
This Graphene, only a few atomic layers thick, also ushered in a new era of Two-Dimensional Material research.
The preparation method for this entirely new material was incredibly simple.
So simple that a university student could do it by hand at home.
However, if industrial application was the goal, this preparation method was definitely not viable.
Therefore, the price of Graphene as a material remains relatively expensive today, and large-scale production is very difficult.
"Graphene, that's certainly..."
"Wait a minute!"
A sharp gleam flashed in Su Dingping's eyes.
"You said... could Graphene solve the problem we're facing?"
The light in Su Dingping's eyes grew even brighter.
"The material we need for the Stealth Coating should inherently be able to adapt to, or rather, withstand, the composite extreme environments faced under Hypersonic conditions to a certain degree."
"If the base material's own performance meets the standard, we wouldn't need any additional Microscopic Structural Design."
"This way, we also wouldn't risk overall structural failure from encountering even minor issues due to overly intricate designs."
Guo Xueyun gradually caught up with Su Dingping's train of thought.
"Or perhaps what we really need is a substrate, a foundation with inherently strong enough physical and chemical properties!"
"Only on this foundation can we construct a magnificent edifice!"
Su Dingping nodded repeatedly. He quickly dug out a research paper from the depths of his computer.
"I once read a paper that introduced certain derivatives of Graphene, which theoretically possess extreme thermal conductivity, mechanical strength, and chemical stability."
"This is the one!"
Guo Xueyun leaned over and also recalled some characteristics of this new material.
"Graphene is a single layer of Carbon Atoms. From a macroscopic perspective, its strength is a hundred times that of steel, it has extremely high thermal conductivity, and its chemical properties are very stable."
Su Dingping picked up a pen and began scribbling calculations rapidly on scratch paper.
"Exactly. Theoretically, if we could have a defect-free, single-layer Graphene Film on a macroscopic scale, using such a film as the substrate or component of a coating, its heat diffusion capability and structural stability would undoubtedly be outstanding!"
At this point, Guo Xueyun suddenly became somewhat discouraged.
"But this is only theoretical."
"Even if the samples we produce in the lab truly meet our needs, we still can't apply them to our Fighter Jets."
The reason was simple: the preparation of large-area, high-quality Graphene Films with controllable layer counts and stable integration with other functional materials was a worldwide challenge.
To be precise, just preparing a single layer of Graphene was difficult enough.
Large-scale production of single-layer Graphene was still largely theoretical, let alone manufacturing the Graphene Film Su Dingping needed.
Furthermore, merely preparing the Graphene Film wasn't enough. They also needed to construct the required Light-Absorbing Nanostructures on the Graphene Film!
"Chemical Vapor Deposition... is it feasible?"
Guo Xueyun frowned, deep in thought.
"That's also the mainstream preparation method currently."
Su Dingping shook his head repeatedly.
"High cost, limited area, difficulty controlling layer count, and prone to damage when transferred onto complex curved substrates..."
"This idea can be completely ruled out."
"But regardless, this is a brand new solution approach."
Su Dingping slapped the table.
"Send a meeting notice to everyone. Let's have a meeting to discuss... No, no need for a meeting discussion."
"Come with me to the lab. Let's first try to produce a layer of Graphene Film and get a feel for it."
Guo Xueyun immediately understood Su Dingping's meaning.
Right now, using Graphene to solve the Stealth Coating problem was just one possible solution. It didn't mean Graphene Film could completely solve the difficulties they were facing.
Before confirming that Graphene Film could solve their problem, it was better not to let everyone get their hopes up unnecessarily.
Only after they had verified that Graphene Film could indeed solve the current problem would it be time to discuss how to prepare the Graphene Film.
Three days later, a faint smile finally appeared on Su Dingping's weary face.
The experimental results were very promising. It was no exaggeration to say that Graphene Film was the key to solving the problem they were facing.
It was no wonder Su Dingping hadn't thought of this new material earlier.
After all, this new material had only emerged in recent years and hadn't even appeared on the market on a large scale yet.
"Notify everyone. Let's start a meeting now to discuss how to prepare the Graphene Film we need."
...The meeting lasted for three days and three nights. The amount of cigarette ash swept up alone was enough to fill a large trash can.
Countless people racked their brains.
If it were just about producing some experimental-grade material for application on a Fighter Jet, there would be no difficulty at all.
After all, cost wouldn't be a consideration; just make it.
But if it were to be applied to mass-produced Fighter Jets, cost would become an unavoidable factor.
With current preparation technology, the cost of the Graphene Film needed for each Fighter Jet would be a staggering, astronomical figure.
In other words, it wasn't impossible to do, but the cost of producing it would be too high, making it meaningless.
A slight scratch or bump would mean a loss of hundreds of thousands of dollars. No one could bear that kind of cost loss.
"If the process route is blocked, can we find a way around it?"
An old engineer had a sudden inspiration.
"Actually, what we need isn't a perfect, independent, large-area Graphene Film. What we need should be a network of Graphene..."
"To use a more vivid example, what we need is reinforced Concrete, and Graphene is the Steel Rebar within that Concrete."
This idea made everyone's eyes light up.
"But the problem is, how do we get the Graphene to disperse evenly within the coating? Not to mention making it align directionally and form strong chemical bonds with the aircraft body material..."
Su Dingping said slowly, "However, this line of thinking can indeed serve as a reference."
"Let's stop here for today. Everyone should go back and rest properly. We'll continue the discussion tomorrow."
Su Dingping waved his hand, urging everyone to go back and rest.
After such a long meeting, even an iron man couldn't withstand this level of fatigue.
Research is important, but health must still be taken care of.
The next day, when Su Dingping arrived at the conference room, it was already packed with people.
Having finally seen a glimmer of hope, no one could rest properly until this problem was solved.
Looking at everyone in the conference room forcing themselves to discuss despite their exhaustion, Su Dingping shook his head helplessly.
"Everyone, quiet down for a moment. I've thought of a method that might not even be a proper method."
Stopping the ongoing discussion, Su Dingping slowly voiced his idea.
"Remember the other module being developed alongside our project? The Artificial Intelligence system..."
Su Dingping's idea was simple: if manual preparation was too difficult, could they write an intelligent module specifically to solve the preparation problem of such high-difficulty materials?
"I've heard our country's own Supercomputer can now be officially put into use. The computational power for Artificial Intelligence might be solved using the Supercomputer."
At this point in time, the Longxia Tribe's Supercomputer had indeed been successfully developed, though it hadn't been announced publicly yet.
Su Dingping's idea could only be described as bold, but it wasn't impossible.
Everyone present was stunned by Su Dingping's idea.
"But for such a complex system with nanosecond-level time scales, and evolution under high temperature and high speed, wouldn't the computational load be a bit..."
Someone hesitated.
Anyone with even a slight understanding of the relevant processes knew how fantastical it was to use Artificial Intelligence to precisely control every step of the preparation.
"We don't need the Artificial Intelligence to precisely control the entire process."
Su Dingping lightly tapped the table with his finger.
"We just need to design a complete preparation process and then use Artificial Intelligence for screening..."
To be precise, the approach Su Dingping provided was somewhat similar to the process of using photolithography to manufacture Wafers.
The entire process wasn't one of precise manufacturing, but rather one of screening.
During the preparation process, defective chips are screened out, and qualified chips are sold as high-end products.
Therefore, in this preparation process, what they needed to control was only the final screening step, not the entire preparation process.
Although doing it this way would still result in high costs, it was a method that could serve as a solution, albeit not a perfect one.
If the entire process could be strictly controlled, the cost, although high, should overall still be manageable.
And the by-products could also be treated as lower-grade products.
Calculated this way, after deducting the profit from the by-products, the cost should be reduced to a relatively ideal level.
"If everything goes smoothly, we won't need to occupy the Supercomputer for a long time."
"What we need is to use the computer's computational power to calculate when to perform what kind of screening operation."
"Once the preparation process is standardized, we only need to perform corresponding operations at key nodes."
"If all the problems are solved, then I have no objections."
An Academician made the final decision.
"I support it!"
"I support it too!"
"Agreed. Let's proceed with this method!"
With the order given, the entire team began operating at high speed again.
Members of the materials group frantically began organizing and inputting all experimental data and material parameters from the literature.
Guo Xueyun led the computational team, collaborating with the Supercomputing Center to adjust the material simulation module, constructing and designing efficient inverse design and forward screening algorithms.
This was the first time Artificial Intelligence and process preparation were combined.
Massive calculations proceeded day and night on the Supercomputer's billions of cores.
A week later, the supercomputing department provided the first round of five screened preparation schemes.
According to these schemes, the prepared materials each had their own characteristics. Macroscopically, their performance was similar, but their microscopic structures differed significantly.
One scheme used a biomimetic structure, imitating the micro-nano structures of Polar Bear fur and Butterfly Wings.
The surface layer of the coating was designed with a microscopic nanostructure composed of vertically aligned Carbon Nanotubes and special Ceramics.
This structure was used to efficiently scatter and absorb light of specific wavelengths.
Simultaneously, this structure could also utilize the excellent axial thermal conductivity of Carbon Nanotubes to rapidly conduct surface heat to the inner layer. The inner layer, in turn, was a heat diffusion layer formed by horizontally stacked Graphene sheets...(End of Chapter)
