He pronounced the four words clearly, one by one, with absolute determination.

"What… printing?"

Lu Guangjun and the room full of experts were all stunned, their eyes filled with confusion. Printing paper? Printing this? How can you print metal?

"It's not printing on paper."

Su Dingping walked quickly to the polished metal blackboard, picked up a marker, and forcefully wrote down the keywords.

"3D Metal Additive Manufacturing! Ultra-Precision CNC Machining! AI Intelligent Control!"

The pen tip scraped across the iron board, emitting a harsh screeching sound, as if chiseling through the barriers of thought.

The pen tip rapidly sketched a dynamic schematic diagram on the blackboard.

His voice rose, carrying a power that made it impossible to question.

"The traditional path won't work! We will break it! Why go through the trouble of segmenting the cavity into small pieces and assembling them like building blocks? Powder! Use high-purity metal powder!"

"Treat it as a kind of 'ink,' and let a computer precisely guide a laser or electron beam, layer by layer, strand by strand… directly 'printing' a solid, monolithic cavity embryo in space!"

He pointed fiercely at the schematic position of the 3D model in the center of the blackboard.

"It's like drawing a sketch, but not with a pen; it's using light or an electron beam to accumulate metal layer by layer at the microscopic level!"

The pupils of everyone in the room suddenly contracted, as if they saw an invisible veil being violently torn away!

A subversive manufacturing concept pierced through the iron curtain of their inherent cognition like the dawn of a new world!

"And then."

Su Dingping turned around.

"The printed monolithic embryo will inevitably have subtle surface undulations. This is the battlefield for 'CNC Machining'!"

He pointed to a domestic high-precision CNC lathe prototype currently under development and improvement, the "Pangu 1."

"Using a sharper, tougher, and more obedient 'blade'—carbide or even more advanced cutting tools—we will grind and polish at the atomic level, following paths controlled by AI intelligent algorithms! Let the machine replace the uncontrollable tremors of human hands!"

"Grind away those 'burrs' that are one in a billion atomic layers thick! The force, angle, and temperature of every cut… are all controlled by real-time closed-loop optimization algorithms, with no human intervention throughout the process!"

He slammed his hand against the blackboard.

"One hundred-thousandth of a meter is not a dream; it is a future we can touch!"

The entire laboratory was like a lit powder keg!

"Printing… grinding… AI…" Lu Guangjun was so excited that his breathing was rapid, and he slammed his fist on the table.

"Good! Good idea! A brilliant stroke! Getting it done in one go!"

"But… Director." Li Yun raised her hand, her voice carrying excitement but also wrapped in the cold rock of reality.

"3D metal printer… ultra-precision CNC grinder…" She paused, her voice lowering. "We don't have them…"

The silence lasted only half a second.

Su Dingping scanned the young faces before him, lit up with excitement yet unable to hide their worries—after being tempered by the successive fierce battles of the 'Dragon Star' project, these once green assistants had already undergone a transformation, their eyes hiding the sharpness honed by theoretical foundations and the resilience forged by actual combat.

A sharp and determined arc lifted the corners of his mouth. Without a word of unnecessary sentiment, he directly issued instructions, each word like tempered machine code.

"If we don't have them, we'll build them!"

"Lu Guangjun, Liu Huajian, Chen Yong, you three groups!"

"Target. Ultra-precision CNC lathe technology!"

"Theoretical foundation. 'High-Precision Machine Tool Dynamics,' 'Vibration Control and Error Compensation,' 'Intelligent Control Systems'… bring them all out! Using the existing 'Pangu 1' prototype as a foundation, deduce and optimize for me! Find all the joints that need upgrading—spindle, guide rails, drive systems, thermal deformation compensation! Come up with a feasible in-depth design plan!"

"Yes! We guarantee to complete the mission!"

The three straightened their backs, their eyes burning with high fighting spirit, and without a second of hesitation, they accepted the order in unison.

Su Dingping turned his gaze to another group of people.

"Zhang Mingyuan, Wang Haitao, Xu Jie! Your group!"

"Target. 3D metal printing!"

"Follow me! Conquer the key points—metal powder fluidization control! Energy field distribution of lasers or electron beams! Interlayer metallurgical bond strength!"

After issuing the orders, Su Dingping walked straight to his core workstation, and the moment his fingers touched it, he called up the holographic projection design interface. Without a moment's hesitation, his fingertips flew across the virtual projection keyboard like butterflies, and lines of precise material fluid simulation equations and mathematical models of energy beam fluctuations instantly filled the entire space.

Days and nights without sleep! The entire 'Dragon Heart 2' laboratory was completely transformed into a melting pot of thought and code.

On this side, Su Dingping led Zhang Mingyuan's group in a day-and-night battle to overcome the microscopic physical barriers of metal printing.

How does the subtle convection of metal powder in inert gas affect the landing precision?

How can residual stress during instantaneous solidification be accurately predicted and offset?

What if the precision and surface finish of the printed small holes do not meet the cavity requirements?

Every question was a mountain overgrown with thorns.

Data flowed like a waterfall on the light screen, and complex systems of equations were like tangled vines.

"Director! The 17th microgravity flow field simulation failed! Unexpected turbulence occurred in the particles at the nozzle!"

Zhang Mingyuan's voice was tense.

"Readjust the internal cone structure of the nozzle. Reduce the outlet diameter by 0.5 millimeters and lower the outlet flow rate by 10%. At the same time, increase the shielding argon gas pressure by 10%. Calculate again!"

Su Dingping's eyes were bloodshot as he stared at the screen. The next set of simulation curves finally became stable and controllable, and a sharp glint flashed in his tired but bright eyes.

"Feasible! Design the new nozzle according to this plan! Get it done within three days!"

On the other side, the "Pangu Project" group led by Lu Guangjun was also undergoing a soul-honing experience.

The trembling of the old lathe spindle, the deformation error of the guide rails at high speeds, the overshoot of the drive motor during instantaneous start and stop…

One after another, the deep-rooted stubborn diseases of the traditional machining field were laid on the table, to be detected with more advanced instruments and deconstructed with deeper dynamic models.

The whiteboard in the conference room was densely covered with formulas and validation paths.

"Engineer Lu! The dynamic and static stiffness matching scheme for the spindle bearing still doesn't work! The noise and vibration at high speeds are exceeding the limits again!"

Young engineer Chen Yong stared at the footage captured by the high-speed camera, looking anxious.

"Don't panic!" Lu Guangjun's voice was hoarse but carried a heavy strength.

"Last time we ignored the cumulative effect of thermal drift. Reduce the bearing installation preload by 0.005 Newtons, and at the same time, increase the spindle box temperature control precision by another half a degree! Add a set of micro-compressors to the liquid cooling system! Also, change the guide rail ram material to a special alloy with an X-type molecular structure, increasing torsional stress resistance by 30%. Recalculate the vibration modes!"

He wiped the sweat from his forehead. "We must lock down the source of error in every link! One hundred-thousandth of a meter precision means every link must approach perfection!"

One week slipped away quietly amidst countless failures, overturns, and reconstructions.

Finally, at the moment another dawn had just torn through the skyline, in the conference room of Lu Guangjun's group…

With a "rustle!" sound, reports that condensed everyone's wisdom, sweat, and even a few strands of hair pulled out by their fingers, were neatly stacked in front of Su Dingping.

"On the Application and Lubrication Optimization Details of High-Precision Composite Ceramic Materials in Spindle Bearings"

"Precision Linear Motor Drive Compensation Algorithm Based on Multiple Feedback Mechanisms"

"Path Planning and Thermal Deformation Offset Model for Super-Hard CBN Cutting Tools for Core Cavity Surface Machining"

"Feasibility Pre-research on the Application of Magnetic Levitation Platforms in High-Precision Lathe Guide Rails"

A thick stack of paper, filled with hardcore data and technical charts, lay heavily on the table. Behind every page was the sharpness honed after days and nights of tackling tough problems!

Su Dingping flipped through them page by page, not quickly, but for every key improvement point and every targeted design optimization, he gave a look of affirmation.

Finally, he closed the last page. "Very good!"

He raised his head and looked around at those faces filled with hope yet unable to hide their nervousness. "The direction is precise, the arguments are sufficient, and the technical incisions are all hitting the vital points!"

He didn't offer too much praise, but immediately took out a special drafting pen from the side, quickly sketching and annotating in the blank spaces of the report.

"Deep Improvement Design Outline for the Ultra-Precision CNC Lathe 'Pangu II'"!

"Spindle System—increase maximum speed by 30%, adopt the magnetic levitation preload bearings we just broke through with, and actively offset thermal deformation drift!"

"Control System—embed a real-time deep learning neural network kernel to not only compensate for known errors but also predict future potential fluctuations!"

"Tool Changing Device—a fully intelligent tool magazine that automatically switches between seven types of hardness material cutting tools!"

A series of more precise, bolder, and more cutting-edge technical solutions, like the finishing touch on a painting, were quickly infused by him into these solidly grounded plans!

He put down the pen and his gaze swept over the two teams of people in front of him. On one side was the thick "Pangu II Deep Improvement Design Outline," and on the other was the "Core Architecture of the Super Metal 3D Printing Prototype," suspended in mid-air, shimmering with light, with countless parameters perfectly converging.

The laboratory was silent, with only the low-frequency humming of machines and everyone's clear heartbeats. The air was filled with the faint scent of metal dust and the bitter smell of engine oil—the traces of battle.

Su Dingping rested his hands on the edge of the metal tabletop, his deep gaze sweeping over the blueprints, data streams, and those faces soaked in sweat yet ignited by thought, finally landing on the heavy plan and the three-dimensional virtual architecture pulsating with vitality.

"What remains to be done." Every word he spat out was like a cold metal ingot hitting a steel anvil, clear and heavy. "Is to turn what is on paper and on the screen into something real, usable, and functional under our hands."

The room was so quiet that one could hear heartbeats.

That day, the laser in the 3D modeling area of the laboratory was still hissing, and the air was filled with the burnt smell of vaporized metal powder.

Su Dingping was almost completely buried in the densely scrolling data streams of the holographic interaction console, the blood vessels on his temples throbbing.

Continuous high-intensity tackling of problems was like slow-roasting one's brain over a low flame; every bit of logical calculation carried a burning pain.

Just as he was pressing his knuckles hard against his temples, trying to suppress the dull pain—

"Su Dingping!" A clear voice, carrying a hint of feigned anger, like a sharp ice pick, cleanly and decisively pierced the heavy air curtain of the laboratory.

Su Dingping suddenly looked up, his line of sight passing through the floating data light screen.

Standing in the doorway against the light was a tall figure; her well-tailored beige trench coat accentuated her strong aura—it was Qin Mingzhu.

She crossed her arms, her meticulously groomed eyebrows slightly raised, and her red lips pursed in obvious dissatisfaction.

"Manager Qin?" Su Dingping was a bit surprised, subconsciously rubbing his swollen temples and signaling to pause the work area. "Why are you…"

"Why did I come?" Qin Mingzhu stepped forward with her sharp high heels, clicking, clicking, directly ignoring the few stunned researchers nearby, her gaze like a hook.

"Director Su is such a busy man with a short memory! The threshold of my Zhongchuang Technology is almost being worn down by people waiting for appointments, just waiting for a big shot like you to go and guide the work! But look at you; what about the promised visit and exchange? I haven't even seen a shadow of you. I've been waiting eagerly every day, and the phone calls are almost turning into a hotline!"

The rapid-fire complaints didn't give Su Dingping any chance to interject.

Only then did he belatedly remember that there really was such an appointment, but for the past week or so, other than the winding machine, vacuum cavity, metal powder flow, and tool path optimization, where was there any room for anything else in his mind!

"I'm really sorry." He wiped his face, his weariness mixed with sincere apology. "We've hit a major obstacle in the project recently, and I really can't pull myself away. The things in the laboratory are complex and numerous, and I can't stop for even a step."

"A major obstacle?" Qin Mingzhu saw the dark circles under his eyes and the thick, unresolvable fatigue between his brows, which didn't seem fake. The anger in her heart subsided slightly, and she couldn't be bothered to harp on the missed appointment anymore, switching to a bit of curiosity.

"What kind of difficult problem could make you… ahem, could make you worry like this? Tell me about it; maybe I can help a little? Don't forget, I have officially signed a cooperation memorandum with the laboratory; my level is high enough, so I should have the right to know, right?"

She said the latter half of the sentence half-jokingly and half-seriously, but her eyes held inquiry.

Su Dingping pondered for a moment. The Qin family's resources and connections in the high-end precision equipment field were indeed not to be underestimated, and the metal printing technology in front of him was not the most core national defense secret, so it was worth testing the waters.

"Fine." He pointed to the slightly quieter rest area nearby. "Let's talk over here."

In a few words, Su Dingping explained the dilemma of the vacuum cavity being stuck on the "one hundred-thousandth of a meter" precision life-and-death line, as well as the "two-pronged approach to break the deadlock" that he and his team had thought of—using 3D metal printing to produce a monolithic embryo, and then using an ultra-high-precision CNC machine tool to grind it into place.

"Now." The furrow between his brows deepened. "The first approach, the prototype of this printer, has almost drained my brain, and the second approach, that deadly machine tool, has ridiculously high precision requirements. The existing foundation of the laboratory is too slow to upgrade, and I feel a bit… powerless."

"3D printing? Printing metal? Directly printing such a large vacuum cavity?" Qin Mingzhu listened with her almond-shaped eyes wide open and her small mouth slightly parted, her face a mixture of shock and an admiration of "you crazy people really dare to think." (End of Chapter)