Su Xiaotian's military science classroom is now in session!

Seeing that some reader lords still do not have a detailed enough understanding of bullets, let us talk about them here.

Bullets (Ball; Bullet) are weapons fired by firearms; in wartime, they are even one of the simplest tools for killing enemies or destroying supplies.

Bullets can also be said to be products that integrate physics, chemistry, materials science, aerodynamics, and craftsmanship.

They are both products of civilization and sharp weapons that destroy civilization.

It can be said that the appearance of firearms cemented humanity's position at the upper level of the food chain to a certain extent.

Because no carbon-based organism can withstand bullets fired by firearms.

Even the Cybertronians in Transformers cannot hard-resist firearms.

If there are any, then shove a close-in weapon system into their mouths.

Bullets are composed of four parts: the cartridge case, primer, propellant, and bullet head.

Upon firing, the firing pin strikes the primer, causing the propellant to burn and generating gas to push out the bullet head.

Therefore, regardless of the style and shape of the bullet, it is mostly composed of four parts: the projectile, cartridge case (shell), propellant, and percussion cap (primer).

For bullets, regardless of their purpose, internationally common propellants are mostly smokeless powder: smokeless powder can be divided into (single-base, double-base, triple-base) (whose main component is nitrocellulose), and firearms mostly use single-base powder.

There are different requirements for ammunition used in different firearms.

For example, pistols mostly use porous fast-burning single-base powder.

Rifles use single-hole granular single-base powder whose surface is glazed and passivated.

The primer is composed of: a flash hole, anvil, and priming composition.

Its function is to generate a flame upon firing and quickly and reliably ignite the propellant.

During firing, the priming composition is ignited by the impact of the firing pin and the anvil, and the flame ignites the propellant through the flash hole.

When firing, the firing pin excites the primer.

The primer burns rapidly to ignite the propellant inside the cartridge case (shell), the propellant undergoes instantaneous combustion while generating high temperature and high pressure, squeezing the projectile (bullet head) out of the cartridge case. At this time, driven by the high pressure generated by the propellant, the projectile moves forward, is squeezed by the rifling, generates rotation, and is finally pushed out of the chamber.

Theoretically, the lethality of a bullet is determined by the interaction between penetration and stopping power.

Penetration

Bullet penetration is also called through-penetration or penetrating power, which refers to the ability of the bullet head to drill into or penetrate objects.

Its magnitude is mainly determined by the mass of the bullet head, the sectional density of the bullet head, and the velocity upon hitting the object, usually expressed by the depth of penetrating a certain object.

The penetration of modern rifle bullets is generally relatively strong; for example, NATO 7.62x51 (7.62 represents the caliber of the bullet, 51 represents the length of the cartridge case, in millimeters) bullets can penetrate a 6 mm thick homogeneous steel plate within 100 meters.

Then some special ammunition or ammunition fired by anti-materiel firearms might be even more powerful.

Stopping Power

Stopping power refers to the effectiveness of a bullet head in causing the target to lose mobility after hitting it.

The stronger the stopping power, the less time required to make the target lose mobility; the weaker the stopping power, the more time required to make the target lose mobility.

Due to the relatively complex structure of the human body, hitting different parts will produce different effects.

Therefore, stopping power is not like penetration and cannot be measured with a unified standard.

Generally speaking, the following indicators help to objectively understand the magnitude of stopping power:

Danant Effect

The Danant effect refers to the effect of energy released into the human body after the bullet head is shot into it. Theoretically speaking, the higher the Danant effect, the higher the proportion of the bullet head's own energy acting on the human body, and the better the stopping power.

Temporary Cavity and Permanent Cavity

After a bullet enters the human body, due to the shock wave and the shearing effect of its own kinetic energy, it often forms a cavity larger than the volume of the bullet head itself.

Since human muscles are elastic, the muscles will contract and recover after the bullet passes. Therefore, the cavity formed the instant the bullet passes is called the temporary cavity, while the traumatic cavity formed after the bullet penetrates the human body is called the permanent cavity.

Generally speaking, the larger the temporary cavity, the greater the stopping power, and the larger the permanent cavity, the greater the human injury caused.

Here we must mention an experiment — the cavity test.

The cavity test is an important experimental basis for studying the lethality of bullet heads. In the experiment, items close to human muscle media such as gelatin, Soap, and plasticine are generally shot to determine the size of the temporary cavity, because such experimental objects themselves are not elastic, and the cavity formed after shooting is the temporary cavity.

To determine the permanent cavity, living experimental animals such as pigs, dogs, and cows need to be used for testing. The size of the permanent cavity caused by the bullet and the degree of damage to muscles and bones can be determined through the trauma of the experimental animals.

The Relationship Between Penetration and Stopping Power

Penetration and stopping power often contradict each other. If the penetration is too strong, it may penetrate the target's body after hitting the target and take away most of the energy. However, excessive pursuit of stopping power may lead to a severe decrease in penetration.

Therefore, when designing bullets, it is necessary to balance the relationship between the two.

From this, we can continue to discuss methods for improving bullets.

A bullet head fired through a barrel will be pushed by energy from the propellant's instantaneous explosion and fly in the direction imparted by the barrel.

The cartridge case will separate from the bullet head, staying inside the chamber or being ejected from the chamber by the ejection mechanism along with the recoil.

Therefore, if you want to increase the lethality of a bullet, improvements are generally made on the propellant or the bullet head.

Improvement of Propellant

The role of the propellant is to impart flight energy to the bullet head. Obviously, the greater the energy exploded by the propellant, the greater the power of the bullet.

First, people can increase bullet power by developing propellants that store more energy. However, this is quite difficult, and the formula of propellants has not had revolutionary improvements for a long time.

In addition, increasing the propellant charge of a bullet is the simplest means to enhance power.

Except for shotguns, the specifications of bullets can generally be described by two main parameters: the first is caliber, which refers to the vertical distance between two opposite lands inside the barrel of a rifled gun.

The other is the length of the cartridge case.

If increasing the charge, the simplest way is to increase the caliber or the length of the cartridge case.

Taking the 7.62 bullet as an example, although both NATO forces and Warsaw Pact forces use bullets with a caliber of 7.62 mm, the cartridge case length of the NATO 7.62 bullet is 51 mm, while the Warsaw Pact's is 39 mm. Therefore, the power of NATO's 7.62x51 bullet is far superior to the Warsaw Pact's 7.62x39 bullet.

However, blindly increasing the cartridge case length or ammunition caliber is not a good method, because larger bullets mean a reduction in the amount of ammunition carried by soldiers, or too much recoil to bear.

Starting from the 1960s, the United States brewed a small-caliber weapon reform and began using 5.5193 small-caliber rifle bullets.

Therefore, simply relying on increasing the propellant charge to increase bullet power is difficult to meet realistic demands.

Basic Classification of Bullets

Most of the bullet heads we usually see are of one color, but in fact, bullets come in many colors, such as green, red, black, and white. Why is this?

It turns out that there are many types of bullets with different uses. To facilitate distinction and recognition in combat, manufacturers paint various colors on the tips of the bullet heads.

(Arena Breakout players and Tarkov players should roughly understand.)

Ordinary Bullet

Ordinary bullet heads are unpainted or painted silver (steel-core bullet).

It consists of a copper jacket wrapping a core made of steel or lead.

It is mainly used to kill the enemy's living targets.

Tracer Bullet

Generally, the bullet head is painted green, with a lead core at the front end inside the bullet head, a tracer tube in the middle, luminous agent loaded in the tube, and a fixing ring at the tail to prevent the luminous agent from flowing out.

The components of the luminous agent include combustibles, oxides, and binders, so when it flies at night, it drags a bright light behind it.

Tracer bullets are mainly used to display trajectories, indicate targets, correct shooting, etc.

The bullet head is painted red, and the top is painted purple, mainly for use by some large-caliber machine guns.

Its structure is basically the same as an incendiary bullet, except that a luminous agent is installed at the rear end inside the bullet head.

It gathers the specialties of various cartridges, being able to indicate trajectories (most of its function), pierce armor, and set fires at the same time, mainly used for anti-aircraft and long-distance target shooting.

(We often see machine gun close-in weapon system bullets forming a white line in various works; actually, those are just tracer bullets, because the firing speed is too fast, and countless ordinary bullets are often mixed in.)

Incendiary Bullet

Bullet heads are often painted red, with incendiary agents installed at the front end inside the bullet head.

There is a steel core in the middle of the bullet head, and a tracer agent is installed at the rear.

It contains "fire seed", mainly used to ignite flammable substances, such as the enemy's grass and wood camouflage facilities, ammunition depots, fuel depots, concentrated vehicles, etc.

Shooting at targets such as fuel tanks made of thin sheet metal with it can also yield good results.

Armor-Piercing Incendiary Bullet

The bullet head is painted black (some are painted black with a red circle).

Its steel core is made of quenched high-carbon steel.

The outside of the bullet core is wrapped with a lead sleeve.

The incendiary agent is installed at the front end inside the bullet head, and production components are mostly installed at the rear end of the bullet head.

It is mainly used to shoot at the enemy's light armored targets and fuel tanks.

High-Explosive Bullet

The bullet head is painted white, with explosives installed in the middle of the bullet head. The front of the explosives is equipped with a ballistic cap, penetration tube, and detonator, and a luminous tube is installed behind the explosives.

It is mainly a large-caliber machine gun bullet, used for anti-aircraft shooting.

When the bullet head hits the target, it detonates the explosives due to the action of the penetration tube and detonator.

Because the bullet head does not encounter obstacles inside the barrel, it will not explode.

But when the bullet head leaves the muzzle, if it misses the target or obstacles, after a certain time, the flame of the luminous agent will also ignite the black powder inside, causing the explosives to detonate.

Hollow-Point Bullet

This is a general term for bullet heads that generally expand. This process is commonly known as mushrooming (Mushroom), because the expanded bullet head looks like a straw mushroom, with a large head and a small body.

In the United States, this is a legal bullet, especially used in hunting, and is the most popular bullet head.

Some states also stipulate that this type of bullet head must be used when hunting, because they can better achieve the effect of a one-bullet fatal kill and reduce the suffering experienced by animals.

Hollow-point bullets are different from the explosive bullet heads commonly known as Dumdums; hollow-point bullets should not shatter after entering the target body, though of course if they hit bone, it is not impossible for that to happen.

But in short, it will not be like Dumdums, which are designed to shatter into countless small fragments after hitting the target.

The so-called Dumdum bullet was first produced by the British at the Dum Dum Arsenal in India in 1896, and its official name is "Dum Dum Mark 2 Special", with a caliber of: 303 British, 7.7 mmX56.

Its lead core is exposed at the tip, looking the same as modern soft-point bullets.

It was discontinued due to restrictions by the Hague International Convention of War.

Britain also used hollow-point bullets in the Boer War in South Africa (Boer War, 1899-1902).

Blank Cartridge

Blank cartridges are bullets without bullet heads, meaning they consist only of the primer, cartridge case, and propellant.

The cartridge case of a blank cartridge is slightly longer than that of an ordinary bullet. After being filled with propellant, it is mechanically crimped and sealed at the mouth.

Blank cartridges are mainly used for military exercises and firing rifle grenades in wartime.

When filming war and police-thief themed movies and TV shows, they are also used in large quantities to replace ordinary cartridges to avoid accidents.

Multi-Projectile Bullet

Multi-projectile bullets, as the name implies, are bullets that have two or more similar bullet heads, firing several bullet heads at once (generally 3 to 5), which is equivalent to firing several bullets at the same time, significantly improving firepower density.

Apart from these conventional bullet types, there are also some special bullet types.

Noise bullets paralyze human hearing and the central nervous system through noise waves released during explosion, causing people to faint in a short period of time.

Medical Bullet

The bullet contains sedatives and first-aid drugs.

When a soldier is injured or critically ill, and medical personnel cannot approach, this kind of bullet is fired for first aid to maintain life.

Fire-Extinguishing Bullet

AI Model: gemini-3.6-flash

As long as it is thrown into raging flames, it explodes instantly, releasing a large amount of carbon dioxide or dry powder fire extinguishing agent from inside, rapidly putting out the fire.

Bullet Head Improvements

Apart from the powder charge, improvements to the bullet head have always been an important measure for increasing a bullet's lethality. The cost of improving the bullet head is far lower than improving the propellant powder or increasing the charge size—since the same firearm cannot fire bullets of different calibers or casing lengths without modification, any change means the entire military must replace its firearms and ammunition stockpiles to adapt, incurring a huge cost. In fact, since World War II, after NATO and the Warsaw Pact nations standardized their respective ammunition types, there has only been a single change in ammunition caliber. Thus, tapping into the potential of the bullet head is the lowest-cost way to increase the lethality of existing ammunition.

There are several ways to increase the lethality of a bullet head against the human body:

1. Increasing the mass of the bullet head

Theoretically, the greater the mass of the bullet head, the higher its energy at the same speed, the greater its stopping power against the human body, and the better its velocity retention after long-range flight. Therefore, using heavier bullet heads is an essential means to increase lethality. On the battlefields of Iraq and Afghanistan, US Special Forces switched to the new M262 5.56 rifle ammo. This bullet's head weighs 77 grains (equivalent to 4.98 grams), an increase of nearly 24% over the 4.02-gram weight of the previously used SS109 ammo. Its stopping power against targets showed a marked improvement, and it is frequently used in urban clearing operations.

2. Altering the shape of the bullet head

The shape of the bullet head has a direct impact on its lethality. For instance, to increase penetration power, one must increase the sectional density of the bullet head. Simply put, the sharper the bullet and the harder its material, the stronger its penetration power. Therefore, rifle bullets that require long range and the ability to penetrate body armor or cover must be streamlined spitzer (pointed) bullets, often utilizing hard metals like steel cores to increase head density for greater penetration. Conversely, round-nose or flat-nose bullets have weaker penetration power but strong stopping power and better energy transfer effects. Thus, altering the shape of the bullet head can enhance lethality under the same caliber and powder charge.

3. Changing the material of the bullet head

Generally speaking, using bullets with higher density and hardness helps increase penetration power, while using softer materials can potentially increase stopping power. However, since most bullets are full metal jacket (FMJ) rounds, even soft materials may fail to exhibit their full material characteristics due to the jacket. All in all, using different materials to manufacture bullets will yield different impacts on lethality.

4. Bullet expansion or fragmentation upon entering the body

Bullets designed this way exist purely to increase stopping power. If penetration is too high, the bullet might pass straight through the human body, leaving a large amount of energy unspent on the target. If the bullet explodes, expands, or fragmentates upon entering the body, it releases most of its kinetic energy inside the body, accelerating the incapacitation of the hit target.

5. Increasing instability

Causing it to tumble and become unstable after entering the human body. Bullets designed like this are also meant to increase stopping power; the underlying principle is to gain a stronger energy transfer effect through tumbling and instability upon impact. Bullet tumbling refers to the bullet head rotating in a spiral along its line of flight. Instability means that after entering the body, the bullet no longer travels along its original parabolic path, becoming extremely erratic and changing direction whenever it hits anything. A tumbling bullet causes greater trauma, while an unstable bullet inevitably travels a longer path inside the body, as the shortest distance between two points is a straight line. Unstable bullets often follow an S-shaped path, covering a greater distance through the body and potentially causing extensive damage to organs, viscera, and tissue.

Here is some trivia as well.

Bullet drop

There's a good saying: "What goes up must come down." If you fire a gun into the air, the bullet can fly upward up to 1.5 kilometers (depending on the angle of fire and the performance of the gun; beyond a certain angle, the kinetic energy generated when the bullet hits the ground will only cause minor injuries). After reaching its highest point, the bullet begins to fall. Although air resistance limits the flight speed to an extent, because the bullet's shape is designed aerodynamically, its terminal velocity is still very deadly (if it happens to land on someone). In rural areas, the probability of a falling bullet hitting someone is very low due to low population density. In crowded cities, however, the probability increases significantly, and people frequently die from stray bullet injuries. That is why most large cities have laws prohibiting celebratory gunfire into the air.

Bullet curving

Without a doubt, as long as a bullet is fired on Earth, its flight path is curved. Influenced by Earth's gravity, any object thrown or fired follows a parabola; only the elevation angle and curvature differ, but the parabolic nature remains unchanged. To overcome the parabolic effect, military rifles must set sight elevations to aim at targets at different distances. Another crucial concept in shooting is bullet trajectory height—simply put, how much higher the bullet is compared to the muzzle at a given distance. This is vital for aiming because while the bullet follows a curved trajectory, light travels in a straight line, making your line of sight to the target straight. When aiming at distant targets, you must accurately calculate the distance to know where the line of sight intersects the trajectory.

Zeroing

Another extremely important concept in aiming is zeroing. Zeroing means adjusting a firearm's sights so that fired bullets hit the point of aim accurately at a specific distance. Once zeroed at a certain distance, simply making adjustments based on the sights' scale markings allows shots at other distances to hit the mark as well. Since every gun varies slightly, zeroing is best done before every shooting session. Strictly speaking, there can even be considerable variation between batches of ammunition, so when a sniper receives a new batch of ammo, they usually zero their rifle specifically for that batch and continue using it until it runs out. In simple terms, using different bullets or different guns can cause slight changes in trajectory, such as minor variations in the arc curve. For long-range shooting, zeroing is necessary to determine the approximate arc the bullet travels through the air to hit the target.

So, as everyone knows, if we flick our wrists at extreme speeds just as the bullet leaves the barrel... forgot the beginning, forgot the middle... and that's Gun Kata! Ahhhhh! Cough, just kidding. Dear readers, please don't hit me in the face!

Some believe that theoretically, if the speed of the wrist flick approaches the bullet's muzzle velocity, it could alter its trajectory, firing a curveball similar to a banana kick in soccer, achieving the effect seen in the movie Wanted. In reality, however, this is impossible. First of all, a banana kick in soccer isn't created solely by the motion of the player's foot, but rather due to the Magnus effect. Since a soccer ball is an elastic object, its motion is governed by fluid dynamics. In fluid dynamics, if a cylinder rotating about an axis moves sideways, it experiences a force perpendicular to its direction of motion exerted by the fluid. This phenomenon is called the Magnus effect. In ball sports, the Magnus effect can be used to make the ball drift sideways. If the net force on the ball does not pass through its center, the ball will rotate while moving forward. Thanks to the Magnus effect, the ball drifts laterally as it moves forward, creating a banana-like curveball. Since a bullet is a solid, non-deformable projectile, the Magnus effect is minimal, making it impossible to create such exaggerated curves as seen in the movie. Furthermore, the firearms in the movie are all rifled guns; rifling imparts spin to the bullet upon leaving the barrel. This rotation creates gyroscopic stabilization, making the bullet far more stable in flight than a non-spinning object. Thus, flicking your wrist might cause you to miss the target, but it will never produce the exaggerated curve trajectory seen in Wanted, let alone Angelina Jolie's bullet near the end of the movie taking off from its origin, circling the room to kill everyone, and returning to where it started.

Finally, let's talk about common ways bullets are classified.

By Caliber:

1. Small Caliber Ammunition: Guns with a caliber under 6.5mm are generally termed small-caliber firearms. Examples include the US M16 5.56mm assault rifle, China's Type 88 5.8mm sniper rifle, and the former Soviet Union's PSM 5.45mm pistol.

2. Medium Caliber Ammunition: Guns with calibers ranging from 6.5mm to 9.0mm are generally termed medium-caliber firearms. Examples include Sweden's Ag m/42 6.5mm rifle, Austria's M1894 8mm pistol, and the US M960 9mm submachine gun.

3. Large Caliber Ammunition: Guns with a caliber greater than 9.0mm are generally termed large-caliber firearms. Examples include the US M1911A1 11.43mm (.45 in) pistol, the former Soviet Union's KPV 14.5mm heavy machine gun, and China's Type 89 12.7mm heavy machine gun.

4. Shotgun Gauge: A way to express shotgun calibers. It generally refers to the number of equal-diameter lead spheres made from one pound (453 grams) of pure lead that fit the bore diameter. Commonly used gauges are 12-gauge, 14-gauge, 16-gauge, etc., converting to roughly 18.4mm, 17.5mm, and 16.8mm, respectively.

By Firearm Type:

1. Pistol Ammunition: Designed for pistols. Some are also used in submachine guns, often called pistol/submachine gun rounds (such as the Type 51 7.62mm pistol cartridge). Current military pistol calibers primarily include 5.45mm, 5.8mm, 7.62mm, 9mm, and 11.43mm.

2. Rifle Ammunition: Designed for rifles, with some also used in machine guns, thus called rifle/machine gun rounds (such as the Type 53 7.62mm cartridge). Current military rifle calibers primarily include 5.45mm, 5.56mm, 5.8mm, and 7.62mm.

3. Heavy Machine Gun Ammunition: Designed for heavy anti-aircraft or heavy machine guns (such as the Type 54 12.7mm cartridge). Current main calibers include 12.7mm and 14.5mm.

4. Other Ammunition: Used for shooting competitions, target sports, riot control, and other specialized weaponry.

Take shotgun shells, for example, originating from civilian hunting cartridges and first introduced into police riot control through practical application by Western military and police forces. It generally refers to shells containing multiple pellets per shot. There are also slugs, flechette rounds, beanbag rounds, special-purpose rounds, tear gas shells, non-lethal rounds, and so on.

Currently, the main weapons and ammunition used by Su Xiaotian and Mason are:

glock 18 pistol — primarily using 9mm ammunition

M110 sniper rifle — 7.62mm

P90 submachine gun — 5.7x28mm

M1911 pistol —.45 caliber pistol ammunition

M200 sniper rifle —.408 CheyTac sniper ammunition.

It is worth mentioning that P90 ammunition features very low recoil. Meanwhile,.408 CheyTac ammunition exhibits extremely stable flight after firing, and its recoil is far lower than typical sniper rifle rounds. The downsides are its rarity and high cost. Luckily, Su Xiaotian has the System.