Although this company is not large in scale, it is, after all, a formal automobile manufacturing company. Its Systems are formal and strict in all aspects. The R&D of the new car model is an absolute secret, and specific design drawings and other materials cannot be stored on computers connected to the external network.

Therefore, even Jarvis cannot obtain the specific data and materials for this new car model.

Now that the boss has asked, Anderson, the head of the company's R&D and design department, immediately reported to Chen Mo on the R&D situation of the previously conducted new car model.

According to the requirements of the former boss, Young Taylor, after they conducted market research and analysis, they determined that the new car model indeed had strong market potential, so they quickly began the R&D work for the new car model.

The overall layout sketch design and styling design for the car's concept design phase were quickly completed, and it smoothly entered the engineering design phase.

The overall layout plans—including the layout of the engine, clutch, and transmission, the drive shaft, the frame and unibody floor, the front and rear suspension, the braking System, the fuel tank, the spare tire, the trunk, and the air conditioning System—as well as the design schemes for the vehicle's exterior and interior, were initially completed.

However, problems arose during the engineering design phase when refining the vehicle design.

At first, progress in the engineering design phase was very smooth; the general layout design, including detailed chassis layout drawings, interior layout drawings, exterior layout drawings, and electrical layout drawings, were all completed quickly.

The generation of vehicle styling data, interior and exterior engineering design, electrical engineering design, and chassis engineering design all proceeded very smoothly. In particular, regarding the chassis design, which was the company's greatest strength, the designs for the transmission System, driving System, steering System, and braking System were completed first.

However, regarding the most important powertrain System, although the detailed layout drawing of the engine compartment was provided, the specific engine engineering design was delayed. The heart that would provide power to this new car—the reliance for Young Taylor's all-or-nothing decision to launch the new car R&D plan, that high-performance new engine which, according to Edicott's promise, should have been developed quickly—was not completed on schedule as he had promised.

The R&D of the car model thus became stuck in the engineering design phase, without even entering the prototype manufacturing and testing stages, let alone entering mass production.

The explanation given by Edicott was that the R&D of the new engine was basically completed, but the performance had not reached the estimates; there must be some problem they had overlooked.

However, this was normal; the engine System itself is very precise and complex, and a tiny problem could very likely lead to a significant drop in the overall engine performance. But the current problem shouldn't be major; barring any accidents, they could quickly find the problem and solve it. It was just that the R&D funds were running low.

Young Taylor was now making an all-or-nothing gamble. In order to carry out the R&D of the new car model, he not only mobilized most of the company's working capital but also suspended all special vehicle modification businesses. Car sales subsequently began to decline sharply, and successfully developing the new car model was his only way out now.

Therefore, he had to squeeze out a little more of the already scarce funds and allocate them to Edicott's engine R&D team.

After getting more R&D funds as he wished, after a period of time, Edicott indeed solved the problems with the new engine and successfully trial-produced an engine with more powerful performance than the one originally purchased from Ford.

It must be said that although Edicott's character was very poor, he had strong technical capabilities. However, this ability was not used by him for engine R&D, but rather to manipulate the R&D progress and deceive those above and below him.

This new engine could be said to have been completed entirely by the few people on his engine R&D team, but they were only responsible for their own parts of the work, and the final results were all consolidated into Edicott's hands.

Due to technical confidentiality principles, specific R&D progress and technical breakthroughs were not announced publicly, so other members of the team, apart from the parts they were responsible for, did not know the overall situation of the engine R&D.

No one would have thought that the "upright and dedicated" Edicott would actually conceal results and deliberately slow down the R&D progress. Therefore, only Edicott alone knew the true R&D situation of the entire engine, and the entire R&D progress was completely in his hands.

However, the matter did not end there; otherwise, Young Taylor would not have sold the company.

After the R&D of this new engine was successful, the new car model immediately entered the prototype manufacturing and testing phase.

But the problem arose right there.

Initially, in order to dispel Young Taylor's conservative idea of closing the R&D department and sticking to old business, Edicott deliberately exaggerated the engine's performance, describing it as incredibly powerful.

Like everyone else in the company, deceived by the upright, diligent, and conscientious image that Edicott had deliberately cultivated all along, Young Taylor believed that the years of effort by the engine R&D team had finally given birth to a great achievement.

Under Edicott's instigation, Young Taylor, who fully believed that a "super engine" would be born soon, had his originally passive and conservative mindset quickly reversed. He was full of confidence and wanted to build a "super car" that could match this "super engine," fully unleash its powerful performance, and crush other brands!

Taylor Automobile Company originally produced pickups and SUVs, so Young Taylor's first thought was naturally to work in a familiar Domain, where they had rich experience and a large accumulation of technology.

If they were to switch to making sedans and sports cars, which they had never done before, they would have no experience. It could almost be said that they would be starting from scratch; the difficulty would be too great, and the risk would be high, so there was no need to even consider it.

Having had his confidence stirred by this "super engine" about to be released, Young Taylor did not intend to make low-end cars anymore. Since the engine's performance was strong enough to provide more powerful propulsion and carry a larger, heavier body, using it on their existing models would be a complete waste. As for re-developing larger-sized models, not to mention the time and difficulty, there was absolutely no need for it.

They were originally making mid-size and large pickups and SUVs. Any bigger and they would become trucks, which did not fit their market positioning and customer needs for passenger vehicles.

After all, their large pickups and SUVs, with a length of over five meters, were already considered the largest size among normal passenger vehicles. Full-size SUVs were inherently designed to pursue spaciousness and comfort, and this size was already enough to meet such needs; any bigger would be completely meaningless.

No one would want to drive a behemoth like a big truck around every day; it would simply be too inconvenient.

Genius, this site's address:. Mobile version reading URL: