On the morning of April 19th, two hundred pieces were poured out from the iron box onto a piece of white paper, forming a dark mass. Sun Qian had laid the paper in two layers for fear that the discs would bump against the tabletop. The number on each piece was laser-engraved. Actually, the numbers weren't engraved very straight; some leaned left, some leaned right, but they could all be recognized. They could only be seen when viewed at an angle; looking at them straight on was just a patch of white. The numbers were engraved along the edges, and the number closest to the corner was the smallest.

Sun Qian used the tip of a pencil to nudge them one by one. The pencil had been sharpened, and its tip was very thin. She arranged them into four rows according to their numbers, nudged them to the edge, and used a ruler to align them. Placing each piece, she would brush her fingertip lightly across the disc to wipe away the dust.

The ruler was made of steel and was also old. One end was rounded, and the other had been bumped, creating a small nick. There was a scratch on the scale that happened to split the number "5" in half. She faced the scratched side toward the edge of the paper, arranging them even straighter than what met the eye.

It took until noon for the four rows to be neatly arranged. Because the numbers were small, she checked them slowly. She rested once in the middle and took two sips of water. Because two numbers in the middle were close together, she spent a long time recognizing them. She straightened her back, thumped it twice from behind, and then stepped back two steps to look.

"Bright ones in the center are dense, and the two ends are sparse."

I asked how sparse they were, and she said the first row had thirty-one, the fourth row twenty-six, and the two middle rows had thirty-four and thirty-three respectively.

"There is a difference of eight pieces between the two ends and the center."

Engineer Qin pushed his magnifying glass up and narrowed his eyes slightly. "Eight pieces is not a small number." Wu Dayong stood up from behind the machine, walked over, and pointed at the first and fourth rows. "Positioning. That circle around the edge of the furnace—the edges dissipate heat quickly, causing uneven heating."

I asked why it was uneven, and he said the furnace was round, so the middle was hot and the edges were cool. Once the discs were fully loaded, that circle around the edge pressed right against the furnace wall. I pressed on asking why they weren't thin before, and he said previously there were fewer discs, so they were placed in the middle while the edges remained empty. Now that it was fully loaded, the waste was gone, and the edges had become cool.

Engineer Qin took the Twelve Paths chart off the wall. The nail was just loose, and as he took it down, the corner of the chart scratched a layer of the wall plaster. He flipped to the eighth path.

"For the eighth path, we run no-load first. When we run it, no-load measures the machine; where the discs are placed has never been measured."

I pressed on asking what should be done if it hadn't been measured, and he said to measure it—arrange the entire furnace batch by number and align the positions one by one. He clipped the chart back onto the nail. The nail was crooked, so the chart crooked along with it.

In the afternoon, I went to the Sixth Factory. The road wasn't very far. I originally wanted to ride a bicycle, but in the end, I took Li Lei's car. Old Han arranged the two hundred pieces on the table, lining them up even straighter than Sun Qian had. He didn't use a magnifying glass, only his hands. He felt his way across them one by one, stopped at the first row, and said, "This row, at the edge."

I asked what was wrong with the edge, and he said the edges were cool. When it was cool, the metal layer grew slowly. Slow growth meant it was thin, and if it was thin, the current couldn't pass through.

"How thin?"

"You can't see how thin it is without using a microscope, but the unlit ones are all in these few rows; there's no escaping that."

He pulled his hand back and wiped it on his trousers, wiping very slowly. There was a layer of dust on his fingers, and amidst the dust was a speck of silver powder that flashed brightly for a second.

"Move them toward the center."

He asked rhetorically how much to move them, and I said two fingers' width, three centimeters—move them two fingers' width first.

"Is two fingers' width enough?"

"If not enough, move them again—three fingers' width, one finger's width. Test until it reaches seventy-five percent. Once you've tested it, tell me, and I'll write it down."

He fished a pencil out of his pocket. The pencil stub was short. He drew a circle on the cover of the numbering logbook—a circle so small it was like a fingernail cover. I asked what this was, and he said it was that circle around the edge.

He clipped the pencil back behind his ear. "Move them two fingers' width, and lower the starting point of temperature control by three degrees." I asked why it needed to be lowered by three degrees, and he said because once they were moved, they were further from the fire. Being further from the fire meant heating had to be increased, and heating couldn't be increased halfway; it had to be increased from the starting point. Lower the starting point by three degrees, and everything afterward would be three degrees higher.

I pressed on asking if lowering it by three degrees would cause crowding in the middle, and he said four centimeters would cause crowding. Once the middle was crowded, the metal layer would grow too fast, and the current would be too smooth. Being too smooth was also no good; it would cause a short circuit.

"What should we do then?"

"Find the middle. Two fingers' width, three degrees—that's the middle."

He took the pencil down and dotted a point next to the circle. On April 22nd, for the disc loading, six people arrived at five o'clock. Engineer Qin laid out the diagrams, Zhao Peng handed over the material list, and Sun Qian copied three more pages of the numbering logbook.

For the positioning, they moved outward by two fingers' width, and lowered the temperature control starting point by three degrees. Wu Dayong drew a line with chalk along the edge of the furnace, drawing it lightly for fear of wiping it off.

"No one is allowed to step on this line."

"What happens if someone steps on it?"

"If you step on it, we won't know how much it's been moved, and a whole day's work will be for nothing."

Once loaded, all there was to do was wait. While waiting, one could only wait, and do nothing else. Waiting for thirty-five days, I started drawing checkmarks on the calendar again, one for each day. When I drew the tenth one, Zhao Peng flipped the calendar over to take a look.

"There are still twenty-five left behind."

"Twenty-five left, one a day."

When I drew the twentieth one, Li Lei made a trip to Suburban County. When he returned, he only said the furnace was burning and said nothing else, placing the car keys on the table after speaking. On the morning of May 27th, the sky was overcast, though the impending rain never fell. Li Lei carried the iron box back; it was wrapped in the same old towel. The towel had been washed, but the engine oil stains were still there.

Sun Qian tested for a whole day. When her eyes blurred later on, she closed her eyes to rest for a moment before testing again. She tested until dark, pulling the lamp to the middle of the table. After testing the very last piece, she put her pen down and brushed her hand against the lampshade.

"One hundred thirty-six."

Engineer Qin took the paper and calculated it once: two hundred minus one hundred thirty-six is sixty-four.

"Sixty-eight percent."

"Last time it was sixty-two percent, and this time sixty-eight percent—six points higher, fourteen pieces."

"Fourteen pieces. We are still fourteen pieces away from seventy-five percent."

Sun Qian used rubber bands to bind the box containing the discs. The lid wouldn't close, so she bound it with two loops. The one hundred thirty-six pieces were arranged by number in four rows, with thirty-four pieces per row. Actually, they weren't neat: the two outer rows had fewer, the two middle rows were full, and the outer rows had deficiencies. The shortages were uneven and were all concentrated at both ends.

Sun Qian copied the positions of those missing pieces into her notebook, writing the rows horizontally and the numbers vertically. After copying, she measured with a ruler; the connected positions of the shortages looked like two crescent moons. Engineer Qin stared at it for a second and said those two paths were the furnace walls, not an issue with the discs. The discs weren't broken; the positioning was just bad.

Wu Dayong asked where they should be moved then, and Engineer Qin said to move them inward by two fingers' width. After moving them, the furnace wall would still be the furnace wall, except there would be an extra circle of empty space outside the wall.

"No good, moving them like this will still lead to drop-offs."

"Waste is better than being unlit. Waste means making fewer, while being unlit means doing it for nothing."

Engineer Qin pushed the notebook back, not heavily, just pushing it back to finish the matter. After pushing it, he tapped his fingers on the edge of the table. Zhao Peng, listening at the doorway, nodded and chimed in, "Making less is still money, and doing it for nothing is even more money. Both have to be calculated."

I wrote these two sentences down in my notebook. After writing, I closed the notebook. There was a crease on the cover that hadn't flattened out even after being pressed for half a year.

"Thirty-four, more than last time."

"Eight pieces more."

"Eight pieces—brought out by the positioning."

"Positioning is worth eight pieces."

Wu Dayong wiped away the chalk line and drew another one, pulling it inward by one finger's width. Sun Qian moved the box to the topmost layer of the shelf, placing it alongside the first edition zero, second edition four bright, and third edition zero. All four boxes were aligned just as straightly.

After arranging them, she stepped back two steps to look. After looking for a while, she pinched her fingers and moved the third box by half a finger's width, leaving only after finishing. As for the circle Old Han had drawn, I came back and copied it onto the diagram, drawing the circle on the edge of the fourteenth sheet. It was a size larger than his because my hands weren't that steady.

After finishing, I showed it to Engineer Qin. He measured it with a ruler and said that two fingers' width was three centimeters, so it had to be drawn as three millimeters on the diagram; drawing any more would mean moving it too far. I raised my hand and traced the three-millimeter line twice. The second tracing was straighter than the first, straight as if drawn with a ruler pressed against it. After finishing the tracing, I tested the pencil tip against the pad of my finger.

At night, Old Han called and asked how much it had been moved.

"Two fingers' width."

"Is it enough?"

"Not enough. Sixty-eight percent, falling short by fourteen pieces."

The other end paused for a moment—long enough to hear his television playing on his side. It was broadcasting the weather forecast, predicting rain for tomorrow.

"Move it another finger's width; if not enough, half a finger's width, even half a finger counts."

"What about the money?"

"If the money can't be pooled together, just make one furnace first. Anyway, making one furnace is doing it, and making three furnaces is also doing it. One furnace is two hundred pieces, the same number."

"One furnace still costs sixty-eight thousand."

He didn't pick up on that sentence because he couldn't answer it either, and hung up the phone.

After hanging up, I wrote sixty-eight thousand on the back of the calendar and pressed it under the lamp. There were already three sheets of paper pressed under the lamp.