The autumn sun cast dappled shadows across the land of Huaxia City through sparse clouds. Most of the scaffolding on the eastern wall had been dismantled, revealing the texture of blue-gray masonry, while the city's planning was spreading from the main roads into the interior. That morning, Tianyu stood on the gentle slope in the east of the city with Lao Zhou, Blacksmith Wang, Carpenter Li, and several experienced Artisans—this was the reserved land for the planned Workshop District. At the moment, it was just an empty field overgrown with wormwood, but in everyone's eyes, they could already faintly see the scenes of roaring furnace fires and the constant sound of planes.

"Workshops are the bones of the city," Tianyu said, stepping on the soil and tracing his finger across a simple map he carried. "Iron, wood, cloth—we can't do without any of them. But workshops can't be piled together haphazardly. If the smoke from smelting chokes the weavers, or the sawdust from woodworking clogs the smelting channels, wouldn't it become a complete mess? Today, we must divide this land clearly; who is where, what they are doing, and how much space they occupy must all be determined."

Lao Zhou pulled a more detailed roll of blueprints from his back basket, marked with different colored charcoal pencils for water sources, iron ore transport routes, and timber storage points: "The Lord is right. I took some people to scout a few days ago. There's a mountain spring to the north of this gentle slope that flows down, perfect for providing power; the terrain to the south is flat, suitable for stacking raw materials; that patch of hard soil in the middle is the sturdiest for laying foundations."

Blacksmith Wang carried the iron hammer he had used for many years and set it down on the ground with a "thud," smashing out a shallow pit: "The Iron Smelting Workshop must be close to the iron ore, otherwise transporting materials will be too laborious. I think the north side is quite good; it's near the transport path from the rear mountain iron mine, and the mountain spring can also be diverted for quenching."

Carpenter Li used a ruler to measure the open space, occasionally bending over to check the soil layers: "The Carpentry Workshop needs ventilation, otherwise the sawdust piles up and can easily catch fire. That area to the south will do; it's near the timber storage point, and the wind is favorable. Shavings and sawdust can drift down the slope with the wind without being a nuisance."

I. Site Selection and Foundation: Following the Mountains and Waters, Adapting to the Terrain

"Let's settle the general locations first." Tianyu took the blueprints from Lao Zhou and drew a rectangle in the blank space. "The entire Workshop District will be enclosed here—north to the source of the mountain spring, south to the raw material yard at the bottom of the slope, east to the reserved path inside the city wall, and west to the road leading to the main street. This way, carts transporting materials can come in from West Street, and finished products can go directly onto the main street, which is very convenient."

He squatted down and drew contour lines on the ground with a twig: "Look at this gradient; it's high in the north and low in the south, perfect for the water flow. It's high in the east and low in the west, perfect for the wind. The Iron Smelting Workshop needs water and its smoke is choking, so put it on the high northern slope; the smoke will drift south without affecting other areas. The Textile Workshop is afraid of fire and needs to be clean, so put it in the middle section to the west, far from the Iron Smelting Workshop but close to the water source. The Carpentry Workshop needs ventilation and proximity to timber, so put it on the low southern slope. The Repair Workshop needs to be near all the other workshops to easily fix tools at any time, so put it in the middle."

Blacksmith Wang walked to the high northern slope and tapped the ground with his hammer. The soil was hard and mixed with gravel: "This ground is good! No need to fear collapse when laying the foundation; the furnace base can be built sturdily. The mountain spring flows down from there; we can dig a channel to lead it to the quenching pools, saving us from hauling water." He looked into the distance again, "To transport ore from the rear mountain iron mine, take the small path to the east, and it enters the Workshop District right from the north gate without any detour."

Carpenter Li circled the low southern slope, grabbed a handful of soil, and rubbed it; the sand content was moderate: "The drainage here is good, so there's no fear of waterlogging when it rains, and the timber won't easily get moldy. The wind blows from the eastern city wall toward the western main street, so the shavings won't pile up in the workshop."

Aunt Liu, who was in charge of textiles, also nodded in agreement: "The middle section to the west is good. It's far from the Iron Smelting Workshop, so there's no smoke; it's near the branch channel of the mountain spring, making it easy to wash fabrics; and there's plenty of sunlight, so dyed cloth can be dried directly in the courtyard."

Lao Zhou used an abacus to calculate for a while: "This piece of land is about a hundred and fifty steps long from north to south and a hundred steps wide from east to west. The total area is enough to divide into four major workshops, with a five-foot-wide aisle left over, making it convenient for carts and people to move between workshops."

Tianyu stood up and brushed the dirt off his hands: "It's settled then! Smelting on the high northern slope, textiles in the middle western section, woodworking on the low southern slope, and a piece of land in the middle for repairs. The four workshops will surround the central aisle like the character 'Tian', both separate and connected, looking out for one another."

II. Smelting Area: Furnace Fire Reflecting Iron Bones

The smelting area was designated at the northernmost end, occupying nearly one-third of the Workshop District's area. Tianyu circled a large square on the ground with a twig: "Three Blast Furnaces will be built here—two for smelting iron and one for steel. Next to them, four quenching pools will be set up: cold, warm, hot, and medicinal water pools. Different ironware uses different water for quenching to ensure hardness."

Blacksmith Wang immediately added: "We also need to build a raw material shed to stack iron ore and coke. The shed must be high and well-ventilated to prevent the coke from getting damp. Leave an empty space in the corner as a waste yard for scrap iron and slag; what can be recycled will be returned to the furnace, and what can't will be used for foundations." He tapped several small circles on the ground with his hammer, "A large chimney must be built on the east side of the Blast Furnaces, one zhang higher than the roof of the shed, so the smoke drifts into the high air and won't choke people."

"The water channel must go around the Blast Furnaces." Tianyu pointed toward the mountain spring, "Dig a main channel from the source, and split it into two branches at the smelting area—one into the quenching pools and one to the washing platform. The used wastewater will be discharged south through the branch channel into a Sedimentation Tank outside the Workshop District. Once clarified, it can enter the moat; we cannot directly pollute the water source."

Lao Zhou noted down on the blueprints: "Smelting Area: Occupies fifty steps square, including three Blast Furnaces, four quenching pools, a raw material shed, a waste yard, a washing platform, and one chimney, equipped with one main channel and two branch channels." He looked up and asked, "What material should be used for the furnace foundation?"

"Bluestone mixed with glutinous rice mortar," Blacksmith Wang said firmly. "It must be laid three feet deep, otherwise when the Blast Furnace fires up, the soil beneath will crack. I'll take men to the quarry now to pull materials and strive to level the ground for the furnace foundation within three days."

III. Textile Area: Machine Sounds Accompanying Spinning Wheels

The textile area was in the middle western section, where the terrain was flat and closest to the main street. Aunt Liu gestured with a spinning wheel: "Twenty spinning rooms need to be built here, each with four spinning wheels, which can accommodate eighty women spinning yarn. Next to them, five Weaving Workshops will be set up, each with two looms, enough to weave coarse, fine, and linen cloth. The Dyeing Workshop must be separated and built at the southernmost end, close to the water source for easy discharge of wastewater."

"The Dyeing Workshop must have Sedimentation Tanks," Tianyu reminded her. "Dye water has color; discharging it directly will pollute the channels. Three tanks must be dug: wastewater first enters the first tank for sedimentation, then flows into the second tank where lime is added for neutralization, and finally into the third tank for clarification before it can be discharged."

Aunt Liu nodded: "We also need to build a drying yard with bamboo racks so the dyed cloth can be spread out to dry. With plenty of sunlight, it will dry quickly. A warehouse will be built in the corner for cotton yarn and finished cloth; it must be three feet off the ground to prevent rats from biting."

Lao Zhou drew a rectangle on the blueprints: "Textile Area: Occupies thirty steps square, including twenty spinning rooms, five Weaving Workshops, three Dyeing Workshops, three Sedimentation Tanks, one drying yard, and one warehouse, with one mountain spring branch channel diverted." He looked at Aunt Liu, "Is there enough wood? Spinning wheels and looms must be made of hardwood."

"Carpenter Li said he can spare a batch of locust wood, enough to make the machines," Aunt Liu said with a smile. "We're just waiting for the site to be leveled so we can start building the sheds."

IV. Woodworking Area: Fragrant Shavings Filling the Courtyard

The woodworking area was on the low southern slope, right next to the raw material yard. Carpenter Li measured an area with his ruler: "Ten Carpentry Workshops will be built here, each with two workbenches and a set of planing and chiseling tools. We'll build a large Sawmill with a three-zhang-high wooden frame to saw long timber. An empty space will be left in the corner as an Assembly Yard, where door frames for city gates and beams for houses must be assembled before being transported out."

"The Sawmill needs power." Tianyu pointed to the mountain spring flowing from the north, "We can dig a branch channel and set up a Water Wheel. The Water Wheel will drive the saw, saving ten times the effort of people pulling a large saw. Lao Zhou, have someone calculate the dimensions of the Water Wheel; it must match the flow rate of the channel."

Lao Zhou agreed and asked, "Where will the timber be stacked?"

"Right to the east of the woodworking area," Carpenter Li pointed to an open space. "Build a three-foot-high platform with stones and stack the timber on top, far from the ground so it doesn't easily get damp. Then set up a rain shed and cover it with oilcloth so work can continue even on rainy days."

He also specifically drew a small square on the blueprints: "A tool room must be built to store planes, chisels, ink fountains, and such; we can't have them going missing. Then set up a rest shed where the masters can take a break and have some tea when they're tired."

Lao Zhou noted: "Woodworking Area: Occupies forty steps square, including ten Carpentry Workshops, one Sawmill with a Water Wheel, one Assembly Yard, a timber storage platform, a tool room, and a rest shed, with one branch channel diverted with a Water Wheel."

V. Repair Area: Skillful Hands Mending All Things

The repair area was in the middle of the four major workshops, acting like a hub. Tianyu drew a small square: "This place doesn't need to be too big; building five rooms will be enough—one for repairing ironware, with Blacksmith Wang's apprentices taking turns; one for repairing wooden items, looked after by Carpenter Li's people; one for repairing textile machines, managed by Aunt Liu's people; one for spare parts like screws, rivets, and wooden wedges, all sorted and arranged; and the last room as a duty room. If anyone's tool breaks, they can come here to register and get it fixed."

"We also need a blacksmith's forge, a small one will do," Blacksmith Wang added. "It can melt small iron parts to fix a hoe or repair an iron ring, without needing to make a big fuss like in the Iron Smelting Workshop."

Carpenter Li also said: "We should prepare some glue and wooden nails; they'll be useful for repairing wooden items."

Lao Zhou drew a small square in the center of the blueprints: "Repair Area: Occupies ten steps square, including an ironware repair room, a wooden item repair room, a textile machine repair room, a parts warehouse, and a duty room, equipped with one small blacksmith's forge."

VI. Layout Map Complete: Each Performing Their Duties, Interlinked

By the time the final stroke fell on the blueprints, the sun was already leaning toward the west. The location, size, function, and supporting facilities of the four major workshops were clearly presented on the hemp paper—the roaring furnace fires of the Smelting Area in the north, the clattering machine sounds of the Textile Area in the west, the flying shavings of the Woodworking Area in the south, and the skillful hands moving in the Repair Area in the middle. Carts came and went in the aisles, and clear water gurgled in the channels, like a painting coming to life.

Tianyu held up the blueprints against the sunlight: "Each workshop is separate yet connected by aisles and water channels. Raw materials can be transported along the paths, finished products can be shipped out the same way, wastewater has a place to be discharged, and waste can be recycled. This is what it means for 'each to perform their duties, interlinked'."

Looking at the markings for the smelting area, Blacksmith Wang was already pondering the dimensions of the Blast Furnaces; Aunt Liu stared at the drying yard in the textile area, calculating how many Soapberry Trees should be planted for easy fabric washing; Carpenter Li was sketching the appearance of the Water Wheel in his mind, thinking about how to make it turn more smoothly.

Lao Zhou carefully rolled up the blueprints: "I'll have people make several copies immediately—one to be posted at the entrance of the Workshop District, one for the masters of each workshop, and one to keep for the archives. We'll start leveling the land first thing tomorrow morning, laying the foundations first, then building the sheds, striving to have every workshop operational within a month."

The afterglow of the setting sun spilled across the empty ground, stretching everyone's shadows very long. Tianyu looked at this land that was about to become bustling, as if he could already hear the roar of the Blast Furnaces, the turning of the spinning wheels, and the rustling sound of the planes. Workshops are the bones of the city, and these detailed plans are the veins upon the bones. When the veins are clear, the bones can be strong, and the city can truly stand firm and come to life.

"Let's go," Tianyu patted Lao Zhou on the shoulder. "Have the brothers get their tools ready; we start work tomorrow."

Everyone walked back carrying their tools, their footsteps making a rustling sound on the grass. The distant city walls stood silent in the twilight, while the Workshop District inside the city was slowly unfolding toward a boiling future with each step of this planning.