On the open ground of the Jinghai Port industrial zone, thirty young people stood in two rows with their luggage on their backs. New wooden tags were pinned to their chests, bearing the words "Industrial Apprentice Class - Phase One." Tianyu stood before a temporary podium, holding a yellowed booklet in his hand—the "Industrial Introductory Textbook" that he and Hans's team had stayed up for three nights to compile. On the cover, bold gilded characters read: "Technique carries the Dao, Industry establishes the roots."

"From today onwards, you are the first batch of industrial apprentices in Pacify the Sea," Tianyu's voice carried through the morning mist to everyone's ears. "In three months, the spinning machines of the Textile Factory and the lathes of the Machinery Factory will all depend on you to operate and maintain."

A Mu, standing in the front row, clenched his fists. This young hunter from the Mountain Sparrow Tribe had been chasing antelopes on the grasslands six months ago, but now he was about to enter a workshop full of steel to learn technology. Beside him, Xiao Ya was the daughter of a bankrupt cloth merchant; her father's workshop had closed because of a lack of skilled workers, and she had come here to learn the trade and reopen the workshop in the future.

The young people below the stage came from all directions: there were children of herders, descendants of fishermen, and even a few family members of Dutch captives. Tianyu had deliberately relaxed the admission requirements—as long as they were willing to learn and work hard, they could enter the class regardless of their background.

I. Curriculum System: A Ladder from "Literacy" to "Machine Operation"

The apprentice class schedule was posted on the blackboard on the earthen wall, densely packed with characters and divided into three major sections:

Basic General Education Courses (One Month):

- Literacy Class: Two hours every day, first learning mechanical terms (gears, bearings, main shafts) and operational terminology (start, feed, emergency stop), then learning simple arithmetic (measuring dimensions, calculating output). The teacher was a scholar invited from the city, who was surprised to find that although these young people had a poor foundation, they studied harder than anyone else just to understand the blueprints.

- Safety Class: Taught by Old Wang from the Machinery Factory, who took the students to visit the workshops, pointing at case studies of workers injured by iron shavings: "You can't wear gloves when the lathe is rotating, or they'll get pulled in; the milling machine's protective cover must be fastened tight, as flying iron shavings can blind you." He even composed a safety mnemonic: "Check three times before starting, check three times after stopping; don't touch electricity with oily hands, never pick up iron shavings with bare hands."

Professional Skills Courses (One and a Half Months):

- Textile Technician Track: Learning the "feeding-drafting-twisting" process of spinning machines and practicing the "pedaling-shuttle throwing-tension control" techniques of looms. Aunt Li led the students in practicing on simulated machines; whenever someone's yarn broke, she would point at the spindle with a bamboo stick: "Look closely, it breaks if the draft ratio is too high; try reducing it by half a notch."

- Mechanical Technician Track: Starting from identifying tools (different sizes of wrenches, types of files) to learning lathe operations (how to clamp workpieces with a three-jaw chuck, how to adjust the tool angle). Hans's assistant, Peter, led them in practicing on scrap materials, requiring each person to turn ten qualified bolts to pass. One student ruined twenty bolts and cried about giving up, but Peter pulled him back to the lathe: "When I was learning, I ruined a hundred before I succeeded."

Comprehensive Practical Courses (Half a Month):

- Students were assigned to workshops in the Textile Factory and Machinery Factory for internships, acting as assistants to veteran masters. A Mu was assigned to the Machinery Factory; on his first day, he followed his master to change tools on a lathe. Although he was clumsy, he studied exceptionally carefully. Xiao Ya went to the Textile Factory; she was naturally sensitive to fabrics and quickly mastered the knack of judging yarn thickness.

"The curriculum must change with the industry," Tianyu said to the head of academic affairs while looking at the schedule. "Next month, add a'Steam Engine Principles' course. In the future, machines will be steam-driven; it won't do if they don't understand this."

II. Teaching Staff: Turning "Old Masters" into "Good Teachers"

In the training base's faculty pool, many people with "extraordinary skills" were hidden:

Technical Backbone Group:

- Old Wang (Machinery Factory Forging Group Leader): Skilled in "metaphorical teaching," when explaining gear meshing, he would pick up two steamed buns to demonstrate: "Teeth are like the pleats of a steamed bun; they have to fit perfectly to bite tightly. Too loose and they slip, too tight and they grind." The students understood immediately.

- Aunt Li (Textile Factory Machine Operator Group Leader): Had a pair of "fiery eyes"; with just a twist of her hand, she knew what was wrong with the yarn a student spun: "This thread doesn't have enough twist; it's like unbundled firewood, it falls apart as soon as you pull it." She also led the students in spinning competitions, where the winner would receive a piece of new fabric.

Dutch Engineers Group:

- Hans (Chief Mechanical Engineer): Responsible for teaching "Mechanical Drawing," he brought Western drawing tools and taught everyone to use set squares and compasses to draw standard blueprints. Some students found it troublesome, saying "hand-drawn sketches are also understandable," so Hans brought out two drawings for comparison: "A hand-drawn image is like a crooked tree, the machine won't recognize it; a standard image is like a straight utility pole, the machine understands it at a glance."

- Peter (Precision Machining Technician): Taught the "Use of Measuring Tools," from vernier calipers to micrometers, requiring students to measure the same part with an error of no more than 0.02 millimeters. His most frequent saying was: "Machines are honest; they are only serious with you if you are serious with them."

Cross-disciplinary Teachers:

- The Accountant: Came to teach "Cost Accounting," teaching everyone to calculate "how much iron and coal it takes to turn one gear," letting the students understand that technology must not only be useful but also cost-effective.

- The Old Shipwright: Taught "Material Properties," bringing samples of various woods and steels for students to touch, knock, and burn to feel the temperament of different materials: "Pine is soft and can't be used for gears; steel is hard but prone to cold brittleness, so you can't smash it hard in winter."

To make the teachers teach more diligently, Tianyu set a rule: if the passing rate of students at graduation exceeded 90%, the instructor would receive a double bonus. For this reason, Old Wang moved his home anvil to the classroom to teach the students forging by hand, and Aunt Li brought out the operation notes she had accumulated for ten years for the students to transcribe.

III. Textbook Compilation: Turning "Experience" into "Standards"

The oil lamps of the training base often stayed lit late into the night as a group of people gathered around a table arguing—they were compiling the first batch of localized textbooks.

In "Introduction to Textile Technology," Aunt Li added many "rustic methods": "To judge the humidity of wool, grab a handful; if it scatters after you let go, it's just right; if it clumps, it's too damp"; "If a warp thread breaks on the loom, check the dropper first; whichever one falls, that's where the thread is." These were her decades of experience, much more practical than the theories in books.

The "Fundamentals of Mechanical Machining" was primarily written by Hans but included annotations by Old Wang. Where Hans wrote the "Lathe Speed Calculation Formula," Old Wang drew a simple table next to it: "If the workpiece diameter is three inches, set the speed to three hundred RPM; if the diameter is five inches, set it to two hundred RPM," allowing students who had never learned arithmetic to understand.

The most special one was the "Safety Operation Manual," which was entirely made of comics—a worker wearing gloves while operating a lathe with the glove getting caught in the machine, with a large "X" drawn next to it; an apprentice reaching out to pick up iron shavings without turning off the milling machine and getting cut, with "Stop the machine before picking up" written beside it. This illustrated approach allowed even illiterate students to understand clearly.

"Textbooks shouldn't just copy Western ones; they need to be grounded," Tianyu said, flipping through the newly printed manuals. The cases inside were all things that had happened locally. "Most of our students are farmers and herders; we must use language they can understand to explain principles they can use."

Two hundred copies of the first batch of textbooks were printed, and they were quickly thumbed through until the edges curled. A Mu drew gear sketches all over the blank spaces of "Fundamentals of Mechanical Machining," while Xiao Ya noted down every mnemonic Aunt Li said in "Introduction to Textile Technology." These notes, carrying their warmth, became the best "living textbooks."

IV. First Batch Graduation: Turning "Apprentices" into "Technicians"

Three months later, the graduation exam was held in the workshop. Students in the textile track had to independently spin one jin of 40-count cotton yarn, while those in the mechanical track had to turn ten qualified bolts. No cheating was allowed—the veteran masters held measuring tools, watching everyone's operation.

A Mu stood before the lathe and took a deep breath. He had once been so nervous that he turned a workpiece thick at one end and thin at the other, for which Peter had made him practice for three days. Now, he steadily turned the feed handle, the tool carving uniform shavings from the steel. In the final measurement, the error for all ten bolts was within 0.01 millimeters.

Xiao Ya also performed steadily at the loom. Her pedaling rhythm was like dancing, and the shuttle flew between the warp threads quickly and steadily. The cotton cloth she wove was as flat as a lake's surface, making even the most critical Aunt Li nod: "This girl learned faster than I did back then."

Ultimately, 28 students graduated successfully, a passing rate of 93%. At the graduation ceremony, Tianyu issued a "Technician Certificate" to everyone; on the wooden tags tied with red silk, their names and trades were engraved.

"A Mu, Pillar, the five of you go to the Machinery Factory to learn forging from Old Wang; Xiao Ya, Chuntao, the seven of you go to the Textile Factory to manage looms under Aunt Li," Tianyu read the assignment list. "The rest of you will go to the newly built training base as teaching assistants to teach what you've learned to the next batch of students."

A Mu touched the four words "Mechanical Technician" on the wooden tag and suddenly bowed deeply to Tianyu. This former hunter now had a light in his eyes brighter than a campfire on the grasslands: "My father said that learning blacksmithing lets you marry a wife, but learning to operate machines can let everyone in the tribe live a good life."

Xiao Ya kept her Technician Certificate close to her. She thought of her father's bankrupt workshop and now felt confident in her heart: "After I study for two more years, I'll go home and open a workshop that uses machines to weave cloth, so all the villagers can wear good fabric."

Watching the students rush to their respective posts, Tianyu stood at the entrance of the training base, looking at the "Three-Year Plan" on the wall: recruit fifty students next year, a hundred the year after. He wanted every workshop in the industrial zone to have technicians they had trained themselves; he wanted every tribe and every village to have someone who could understand blueprints and operate machines.

The golden light of the setting sun passed through the workshop windows, shining on the newly assigned apprentices. Their shadows overlapped with the shadows of the machines, like trees taking root. Tianyu knew that these young people were the true foundation of industry—as their skills became more refined and as more people entered the training base, the future of this land would become increasingly solid.