After confirming that all preparations were complete, Chen Yu initiated the full isolation protocol for the dedicated chamber.

The heavy alloy blast doors slowly descended, completely sealing off the interior space from the rest of the warship.

The independent energy system began to provide power, ensuring the repair process would not be subject to any external interference.

Environmental monitoring indicated that parameters such as indoor radiation levels, temperature, and humidity were all within the ideal range.

Chen Yu's massive mechanical body moved to the front of the stc system's main console, and his mechanical tentacles connected to the system interface.

He first executed the standard shutdown procedure, putting the system into deep standby mode.

Energy readings showed each module of the system stopping in sequence, the light emitted by the spherical main body gradually dimming until only the basic maintenance power remained.

After completing the system shutdown, Chen Yu retrieved the Dimensional Cube from the vault built into his armor.

Strange energy patterns flowed across the surface of this ancient device. As the authentication command was entered, the cube began to rotate and unfold, revealing the precious item stored within.

He retrieved the repair-type stc system unit from the core storage area.

The unit was rectangular in appearance, about the size of a palm, and possessed an overall dark gold luster.

Its surface was smooth and flat, with no visible ports or buttons; only the brilliant golden light on its surface indicated that it was no ordinary object.

To an observer unaware of its purpose, it was merely a beautifully crafted metal block.

Chen Yu placed the repair unit on the surface of the stc system's main console.

Following the instructions, he entered a specific sequence of activation commands.

The moment the command was issued, fine geometric patterns began to emerge on the surface of the repair unit. These patterns gradually lit up, emitting a soft golden glow.

Changes occurred immediately.

The repair unit unfolded automatically, its internal structure blooming like a precise mechanical flower.

Countless slender golden filaments of energy extended from within. These filaments seemed to dance in the air as if alive, precisely connecting to every critical node of the stc system.

The main console, the spherical main body, the robotic arm assembly, and the auxiliary equipment—every part of the system was covered by the network woven by these energy filaments.

The instant the connection was completed, a dazzling golden halo expanded outward, centered on the repair unit.

Wherever the halo swept, space seemed to undergo subtle changes.

The brilliant golden light enveloped the entire stc system, and countless particles of light appeared in the air, drifting slowly like golden dust.

The repair process began to show its effects.

The damaged areas on the surface of the stc system's spherical main body were the first to change.

The rust marks caused by age began to fade, and the metal surface regained its original luster.

Broken cables automatically rejoined, and exposed ports were resealed.

A deep crack gradually mended under the envelopment of golden light particles, eventually disappearing completely.

The repair of the internal structure proceeded simultaneously.

Monitoring data showed damaged energy conduits restoring their integrity, broken circuits reconnecting, and failed components returning to normal one by one.

Dense read/write signals came from the database storage unit as lost data blocks were rapidly reconstructed.

Corrosion marks inside the material synthesis vat gradually faded, and the calibration parameters of the detection instruments automatically returned to standard values.

Chen Yu closely monitored the repair progress.

Every detail recorded by his optical sensors was analyzed in real-time.

He noted that the repair was not a simple physical restoration, but a deeper level of "State Reset."

Damaged components were not replaced or repaired but were directly restored to a pristine state, as if time had locally reversed.

As the repair deepened, the functional modules of the stc system began to come online one by one.

The manufacturing unit regained precise control over material synthesis, the design module could once again generate complete technical blueprints, and the efficiency of the energy management system rose to its theoretical maximum.

The status indicator lights on the monitoring screen turned from red to green one by one, and the system integrity reading continued to climb.

However, just as the system was about to be fully restored, an anomaly caught Chen Yu's attention.

Although the physical structure of the core AI module had been fully repaired, its activation process remained stuck at 99.9%.

Multiple restart attempts failed, and the AI core did not respond to any wake-up protocols.

Chen Yu pulled up the detailed diagnostic report.

The data showed that the AI module's hardware and basic software were fully restored, but the connection at the consciousness level could not be established.

This situation was beyond the scope of the repair-type stc system—it could repair damage on a material level but could not wake a dormant consciousness.

After observing for another hour, Chen Yu confirmed that there was no hope of the AI recovering.

He ceased further wake-up attempts and turned his attention to the final testing of other functional modules.

At this point, the energy output of the repair-type stc system began to wane.

The golden light gradually dimmed, the energy filaments slowly retracted, and finally, the repair unit folded back into its original rectangular state.

The light on its surface extinguished completely, turning it into a dull metal block.

Chen Yu retrieved the repair unit and confirmed that it was now defunct.

This precious ancient relic had completed its mission and was now merely a historical artifact with valuable research and commemorative significance.

Meanwhile, the repaired stc system began to start up autonomously.

The spherical main body emitted a white light brighter than ever before, the robotic arm assembly smoothly completed its self-test procedure, and the holographic projector displayed a complete system status map.

Monitoring data showed that the system's functional integrity had reached 99.8%, lacking only the active control of the AI core.

Database checks confirmed that all lost technical data had been restored.

From basic materials science to cutting-edge weapon design, from civilian facilities to interstellar navigation technology, countless pieces of precious knowledge were once again available.

System manufacturing functional tests showed that it could now produce over 30,000 different technological products, with a technical level far exceeding current Imperial standards.

Chen Yu began functional verification of the repaired stc system.

Since the system's AI core had failed to resume operation, he had to access the database directly via the manual interface.

He entered search commands into the console, using "Security Control," "Automated Defense," and "Patrol" as keywords.

The database quickly returned 734 relevant records.

After browsing, Chen Yu selected a template labeled "Light Sentry Unit - Model 74."

This package contained the complete design for an autonomous patrol robot, its technical level significantly higher than similar equipment currently existing in the Empire.

After selecting the template, Chen Yu input the required material list into the system.

He specifically designated the use of the new composite armor material he had tested previously as the primary structural material, while also adding some conventional metals and electronic components.

The system accepted the material request and immediately generated a detailed manufacturing plan.

The manufacturing process started immediately.

The material synthesis vat began to operate, converting basic raw materials into the required special materials.

Three robotic arms worked in coordination: one responsible for forming the structural frame, one for assembling precision parts, and the last one responsible for the integration of electronic systems.

The entire manufacturing process lasted for about thirty minutes.

When manufacturing was complete, a sleekly designed security robot appeared on the workbench.

Its shell used the new composite armor material, presenting a dark gray metallic luster.

The robot's sensor array included multi-spectral observation devices and motion detectors, and its limb joints featured reinforced designs, clearly possessing good mobility.

After confirming that all functions of the security robot met design specifications, Chen Yu continued to test the system's other manufacturing capabilities.

He successively test-produced several different models of tools and equipment parts; all products met design standards, and material performance fully matched expectations.

After completing all tests, Chen Yu lifted the isolation of the chamber. He notified the Tech-Priest team to come for the system acceptance inspection, preparing to officially put this fully restored stc system into scientific research and production use.