Chapter 862: Tactical Maneuver (Eighth Update)

This means that future Haven ground forces might feature a combination of "Elite Type" and "Standard Mass-Produced Type".

The Elite Type will be used for critical assaults or special missions, while the mass-produced type will form the backbone of the massive infantry legions, using a combination of quantity and quality to deal with the swarm or other large-scale ground conflicts.

The fires of war on Zerus are still burning, but Haven's R&D hub has already cast its gaze toward a future forged in the flames of war.

Every explosion, every impact, and every casualty report is being translated into blueprints to optimize the next sharp blade and forge the next sturdy shield.

War is not only consumption, but also the most cruel and effective catalyst for technological iteration.

At Number One Advanced Modification Slipway of the Haven orbital dock, the HS-02 "Tenacity" was securely fixed to the giant scaffold.

In the middle of its hull, the outer shell of a secondary compartment originally used to install additional sensor arrays or auxiliary weapon platforms had been removed, exposing the complex pipelines and structural framework inside.

A special team composed of top engineers and a Tech-Priest was carrying out a critical modification procedure here, installing a short-range tactical jump engine onto this meritorious warship.

The engine module itself was not a behemoth; its core was a highly integrated complex consisting of superconducting coils, spacetime metric interference crystals, and precision field controllers, roughly the size of a standard shipping container.

However, its installation process was exceptionally tedious, requiring seamless integration into the warship's main power network, navigation computer core,

hull structural stress monitoring system, and shield control loop.

Like performing a delicate surgery, the engineers docked the thick superconducting energy conduits to the secondary output of the warship's plasma reactor.

They connected the navigation coupler of the jump engine to the bridge main control computer and star map database using fiber-optic data cables.

A series of inertial dampers and structural reinforcement beams were installed around the engine base to offset the impact of the spacetime stress generated at the moment of the jump on the hull.

Finally, the shield control algorithm had to be modified to ensure that the shields could remain stable or quickly switch modes before and after the engine started, preventing protection failure due to energy fluctuations or space distortion.

The entire modification process lasted for several standard days.

During this period, all other systems of the "Tenacity" underwent comprehensive overhaul and upgrades, including fine-tuning some energy distribution nodes based on the Zerus campaign data, replacing the focusing lenses of the lance array that had suffered greater wear, and strengthening several outer armor plates that had come under sustained attack.

Testing after the modification was scheduled to take place in a desolate star system far from the interference of Haven's gravity well.

The starry sky here was desolate, with only a few cold rocky planets and scattered asteroid belts, providing an excellent testing ground for the new engine.

The HS-02 "Tenacity" hovered quietly in the void, the newly added tactical jump engine interface on its hull shimmering with a standby deep-blue sheen.

Inside the bridge, the atmosphere was solemn.

Every bridge crew member stared closely at the control panel or main tactical hologram in front of them, awaiting the issuance of that critical order.

The navigator's finger hovered above the confirmation key, and the sensor array firmly locked onto the preset coordinates—an asteroid one hundred thousand kilometers away that had been specially fitted with a high-reflection beacon.

"Tactical jump engine, activate." The captain's order was clear and steady.

It was completely different from the grand prelude of warp travel where space was gradually stretched and light was distorted.

This time, only a low, almost imperceptible hum came from deep within the hull, as if some precision behemoth had taken a gentle breath.

Immediately following that, the hull experienced a short and solid tremor, like the hull being gently struck by an invisible giant hammer.

Just after this tremor, the scene in the external observation cameras underwent an instantaneous, almost eerie switch.

One second it was a deep and empty starry background, and the next second, the rough surface of an irregular asteroid abruptly appeared in the center of the field of view, its metal beacon reflecting dazzling light points under the starlight.

That target asteroid had impressively appeared within the recognition frame of the close-range sensors, so close it was heart-palpitating.

"Jump complete!" The sensor officer's voice rang out immediately with a hint of suppressed excitement, "Coordinate error:

plus or minus eight hundred meters. The engine has entered the cooling cycle, and is expected to reach a stable state capable of being re-triggered in forty-two seconds.

Shield system showed a slight fluctuation, a value of three percent, which has been automatically compensated and restored to stability. Hull structural stress monitoring—all data are within the green safety range."

After a brief silence, a faint, relieved sigh of breath echoed on the bridge.

Immediately afterward, various stations began reporting subsystem status confirmations at a faster speech rate. Data from the first combat-oriented test was meticulously recorded: activation response time, spatial positioning accuracy, instantaneous impact on shipboard systems, cooling efficiency—

every parameter pointed to the core objective of this modification—to endow the warship with the ability to perform precise and rapid tactical maneuvers on the scale of the battlefield.

The test was a complete success. This was not just an engine ignition; it marked that the combat mode of the Perseus-class warship was about to welcome a new dimension.

Subsequently, multiple jump tests were conducted at different distances, different angles, and even simulating a slightly damaged state. The errors were all controlled within the kilometer level, and the cooling time varied between thirty-five seconds and two minutes depending on the intensity of use.

This new system gave the Perseus-class unprecedented tactical flexibility.

Almost concurrently, within the massive heavy industrial zone on Haven's surface, another revolution was quietly taking place.

After intense redesigning, the power armor production line codenamed "CMC-2A Mass-Produced Type" completed its final debugging and began trial operation.

Compared to previous models, the appearance of the CMC-2A was more square and concise, reducing many unnecessary curved surfaces and sharp edges, making it convenient for large-scale stamping and welding fabrication.

The armor of critical parts such as the breastplate, shoulder guards, and helmet still used the high-performance "CA-19 Composite Layer", but the thickness and curvature were optimized. Under the premise of ensuring that the defense rating did not significantly decrease, the weight was reduced and molds were simplified.

Non-critical areas, such as the outer arms and lower back calves, were instead switched to a lower-cost but specially strengthened "Carbon Steel-Ceramic Composite Plate", whose defense capability was sufficient to cope with Zergling claw strikes and stray shrapnel.

The joint system retained the core hydraulic and electromagnetic auxiliary design, but some precision bearings were replaced by more durable and easier-to-produce standardized components.

Part of the redundant design of the internal environmental circulation and life support system was simplified, achieving higher integration and reducing assembly difficulty and points of failure.