16
A week later, the workshop bell rang.
Renn stopped what he was doing, opened the door, and the goblin boss Gavitz stood outside, bowing and saying, “Guest, we have finished what you ordered, please check it.”
A large wooden box was placed at the goblin’s feet, and he pushed it over with some effort.
Renn’s eyes lit up, and he flipped open the lid of the wooden box, which was filled with gleaming empty brass casings, without primers or bullets. Each casing was identical in size, clearly manufactured by machine.
He grabbed a handful, inspected them carefully, and nodded with satisfaction.
The casing dimensions met his requirements, and the quality was excellent.
“Boss, this must be your craftsmanship, right? It’s truly amazing.” Renn paid promptly, taking out a pre-prepared money bag and handing it to the goblin, not forgetting to offer a few compliments.
Gavitz poured out the gold shields from the bag in front of Renn, counted them carefully, and said gleefully, “The workshop often receives orders from gunmen to make casings for them. I’m quite experienced, but this is the first time I’ve received such a large order.”
The casings in this large box amounted to a full two thousand, and Renn paid over fifty gold shields for them.
An average gunman might not use that many bullets in several years.
Every shot from a soul gun consumes soul power, and each bullet is meticulously crafted, from materials to enchantments. The process is complex and expensive, leading to a limited supply of soul gun bullets, which must be carefully preserved and never wasted.
Hearing Gavitz’s words, Renn chuckled and said, “Boss, this is just the beginning; there might be more orders in the future.”
“That’s great, welcome to place an order!”
Gavitz rubbed his hands in anticipation. He didn’t care why Renn needed so many bullets; as long as there was money to be made, it was fine. The workshop had a production line specifically for making casings, which was usually idle, so it was rare to encounter a customer with such high demand.
The goblin happily took the money and left.
Renn carried the wooden box back into the workshop, placing it in a corner. The propellant was still being made, so it wasn’t time to load the bullets yet.
Half a day later, a Portal opened beside him, and Auxerre emerged. Seeing Renn still busy, she asked, “Your Excellency the Count, how much longer will you be here?”
“Soon,” Renn replied without looking back.
Auxerre’s expression froze. This was the third time she had asked, but each time Renn’s answer was a perfunctory “Soon.”
Since arriving at the mechanical workshop a week ago, Renn hadn’t left the workshop a single step, except for using the Portal daily to appear once before the Secret Fire Guard at the Magic Hotel. He even ate and slept in the workshop.
She wasn’t interested in machinery and could only tell that Renn was likely building a soul gun.
But this soul gun was very strange.
Just from the size of the parts, it was clear that the finished product would be several times larger and incredibly heavy compared to ordinary soul guns.
Most importantly, she didn’t see any application of magic or runes on the soul gun.
Auxerre doubted if this soul gun would even work, and even if it did, what impact could one soul gun have?
She truly couldn’t guess what this Count of Glamorgan was thinking.
At first, Auxerre stayed in the workshop to observe, fulfilling her duty to protect Renn, but after just two days, she couldn’t stand the tedious waiting.
Renn also didn’t want her to be in the way, watching him build the gun, so he proactively suggested she leave.
His reason was that he had already performed a shapeshifting disguise, so enemies wouldn’t find his whereabouts, and he was safe enough in this mechanical workshop.
Auxerre didn’t insist further, only coming twice a day to confirm his safety.
Unexpectedly, a week passed, and Renn was still in the workshop, seemingly having completely forgotten about his duties as the Count of Glamorgan.
Auxerre said faintly, “My teacher asked to speak with me today.”
Renn’s movements paused. Her meaning was clear: Master Anxi was not satisfied with his progress. No one could ignore the urging of a Saint Soul Wizard.
“I understand,” Renn nodded solemnly. “Give me three more days.”
“Three days?” Auxerre hesitated for a few seconds, then seeing Renn’s persistence, she said, “Alright, I hope Your Excellency the Count can provide some explanation.”
With that, she opened the Portal and left.
After the Portal closed, Renn turned to look at the object in his hands. It was a gun barrel, nearly seventy centimeters long, entirely black, and weighing almost fifty pounds. This single barrel was longer and heavier than most soul guns.
On the table next to him, the completed firearm parts were neatly arranged.
Renn walked over and quickly assembled them. Soon, a large gun appeared in his hands.
If any Earthling with a slight understanding of firearms or who frequently played shooting games were here, they would immediately recognize it as an M60 general-purpose machine gun!
An actor named Sylvester Stallone once wielded this machine gun with one hand and a belt of ammunition with the other, sweeping at enemies in a movie, leaving a deep impression on people and earning it the nickname “Rambo’s Gun.”
The shot he took from a gunman over three hundred meters away that day gave Renn an idea.
He had initially planned to follow that Ideas and build a sniper rifle. There was also a powerful anti-material sniper rifle in his phone game, but sniper rifles required too much precision.
With the aid of his metal touch, careful grinding, and repeated testing, Renn could indeed build a sniper rifle, but it would take a very long time.
After careful consideration, Renn felt that a sniper rifle might not be suitable.
The gunmen of Allen-Erath, after reaching high-tier, could also achieve effects similar to snipers. Their shooting range wasn't as far as a true sniper rifle, but their power was not much worse.
The shot he took was no less powerful than a sniper rifle.
However, high-tier gunmen were not particularly outstanding among the many transcendent professions; they were even at the bottom of the ranks.
Because for this kind of long-range, single attack, which is equivalent to an instant-death spell, many transcendents, especially spellcasters, have their own protective measures and are not so easily killed instantly.
Many spell shields are passively activated when attacked, constantly guarding against sneak attacks.
Unless it's a legendary gunman or above, whose single shot reaches an extremely terrifying level, it's unlikely to achieve a one-shot kill.
It is said that a legendary gunman's full-power shot could demolish an entire building.
This was already comparable to heavy artillery.
However, Renn believed that what gunmen lacked was not the power of the soul gun, but rather the rate of fire and suppressive firepower!
A soul gun is essentially a type of spell; it consumes soul power, and like casting a spell, the stronger the power, the longer it takes to fire. The most powerful enchanted soul gunshots even take two to three seconds per shot.
This slow rate of fire gives enemies too much reaction time.
On the battlefield, the most terrifying weapon isn't a sniper rifle, but a machine gun. It not only has a long range but also a fast rate of fire, unleashing a storm of bullets that gives no one a chance to breathe, suppressing them until death.
In comparison, Renn believed that a machine gun was more suitable for frontal combat than a sniper rifle.
He had two or three machine gun blueprints on his phone, and he immediately chose the M60 Rambo's Gun.
This is a general-purpose machine gun that can be used as a light machine gun for mobile shooting or mounted on a tripod as a heavy machine gun. It uses 7.62mm caliber bullets, has an effective range of eight hundred meters, far exceeding the range of high-tier gunmen, and is farther than the spell range of most wizards.
What Renn valued most was its rate of fire; its theoretical rate of fire was over five hundred rounds per minute, and its actual combat rate of fire reached two hundred rounds per minute.
He had originally wanted to get an M249, which had a higher rate of fire, theoretically up to a thousand rounds per minute, but he didn't have the blueprint, and the M249 used 5.56mm caliber bullets, which were less powerful than Rambo's Gun.
After a week of working day and night, he finally built this machine gun.
Renn didn't strictly follow the blueprint's design; he also made some modifications himself.
The entire gun had 130 parts, and he tried to select the best-performing metal raw materials from the mechanical workshop, balancing hardness and toughness, mostly alloys smelted from adamantine.
Renn discovered that adamantine was a very magical metal, heat-resistant, wear-resistant, hard, corrosion-resistant, and fatigue-resistant. Its performance in all aspects was incredibly high. Its only drawback was its excessive weight and extreme difficulty in processing; otherwise, it would be a perfect metal.
To solve the problem of barrel overheating, he crafted the entire barrel from pure adamantine, thickened the barrel, and extended its length, greatly increasing its heat capacity. This allowed for prolonged continuous firing without needing to replace the barrel.
If time allowed, he even wanted to combine the advantages of a soul gun by engraving runes on the barrel for heat dissipation and cooling, extending the barrel's lifespan.
The consequence of these modifications caused the machine gun's weight to skyrocket, exceeding two hundred pounds!
This was already a true heavy machine gun.
It's worth noting that the M60's original design had an empty weight of only about twenty pounds. After a tenfold increase, an ordinary person couldn't even lift it.
However, for Renn, a two-hundred-pound machine gun was no different from a twenty-pound one; it was even lighter than his Ice Breaker warhammer.
The overweight gun body actually made shooting more stable.
The 1.2-meter-long Rambo's Gun, entirely black and compactly structured, was held by Renn in one hand. His metallic touch extended into the firearm, feeling its performance. Without firing a test shot, he knew there was nothing wrong with the gun.
He rested the machine gun against his waist, mimicking Sylvester Stallone’s movements, sweeping it left and right a few times. The feel was quite good.
“Without spells, and without close combat, what kind of wizard am I now?”
“A mechanical wizard? Or a heavy machine gun wizard?”
Renn fiddled with the machine gun for a while, his mind wandering, before finally putting the gun down. He thought to himself, “Now, all that’s left are the bullets.”
The bullets were the most crucial and difficult part. Renn had taken advantage of Auxerre’s absence two days ago to go to a nearby alchemy shop and buy a large quantity of raw materials.
Months ago, he had already figured out a solvent-based method for synthesizing propellant. This time, however, the quantity was larger, and the difficulty increased significantly. He had almost finished making it and had hidden it in a corner of the workshop, covered with a tarpaulin.
He also found a substitute for fulminate of mercury for the primers.
For the bullet tips, he planned to use the hardest dragon-scale steel to make the core, creating pointed armor-piercing rounds to increase their power.
Additionally, he needed to make a backpack-style magazine capable of holding all two thousand bullets, as well as a flexible feed belt and disintegrating links made of iron plates to connect all the bullets.
The loading process wasn't difficult and didn't require high technical skill, but it involved precise, repetitive work and a large quantity. Without mechanical assistance, doing it by hand would be very time-consuming and laborious.
“I remember seeing a hand-cranked loader before, which allowed one person to make bullets and link them into chains. I’ll definitely need to use it often in the future, so I should make one when I have time.”
“Three days should be enough.”
Renn poured out all the casings and began to work diligently.
