Su Dingping fell silent.

This silence lasted longer than any before.

Su Dingping lowered his head slightly, looking at the report in front of him, his fingers unconsciously tracing over the pages related to this material report.

The meeting room was so quiet that one could hear a pin drop. In the faint silence, Su Dingping felt he could even hear the tiny, low hum of the central air conditioning.

A full minute passed before Su Dingping finally looked up again.

His face showed no signs of agitation.

The panic some had imagined he would show after being exposed at his weak point did not appear on Su Dingping's face.

Su Dingping had no intention of making a forced defense. His face held only a calm that was so deep it was almost solemn.

"Elder Li is absolutely right; his question hits the most critical point."

"This is also one of the most significant difficulties in the entire plan."

Su Dingping's voice was calm, but his speaking rate gradually slowed down.

He spoke word by word, each one sounding as if it weighed a thousand pounds.

"I admit that the material we need is indeed the most important challenge facing the Controllable Nuclear Fusion project, and even any practical fusion reactor in the future!"

"And..."

"I must admit that this material currently only exists in my conceptualization."

"Of course, as for the specific synthesis method... I already have some ideas."

"But just as Elder Li said, this method only exists as a theoretical possibility."

"We likely still have a very long road to travel before it can be truly implemented."

He actually admitted it!

Several gasps echoed through the meeting room.

Many people thought Su Dingping would likely change the subject or use some other method to gloss over the issue.

Others thought he might try to blur or simplify the problem.

Some even expected him to boastfully claim he already had a solution and just needed time.

No one expected Su Dingping to so openly and honestly admit where the problem lay!

This left everyone present in a state of shock.

Similarly, the perception of Su Dingping held by a few people underwent a slight change.

In any case, as long as he sincerely admitted the problem, it meant the man was at least not beyond redemption.

Or rather, this plan didn't actually contain much of his own selfishness.

"But," Su Dingping's tone shifted, and his gaze sharpened, "'non-existent' or 'extremely difficult to achieve'... does not mean 'forever impossible'!"

"Breakthroughs in materials science are, for the most part, not linear accumulations!"

"In the event of a coincidence, or the emergence of a brand-new physical understanding, or perhaps the appearance of an unprecedented preparation method, the field of materials science often experiences a leap-forward breakthrough!"

Sometimes, a technological breakthrough for a critical material in one field actually comes from a breakthrough in a completely different scenario.

Stainless Steel is a household material; in modern society, almost every home has one or several items or pieces of furniture made of it.

Stainless Steel chopsticks, spoons, sinks, and even pots, bowls, and pans...

As everyone knows, iron rusts rapidly when exposed to water and air.

This problem plagued humanity for thousands of years without being solved.

Then, while a gunsmith was researching harder gun barrels, he accidentally added carbon and chromium to the mix.

Although this didn't make the iron harder, the addition of chromium formed a thin film of chromium oxide on the surface of the steel.

This film was excellent at preventing corrosion, and it could even repair itself.

Thus, the world's first piece of Stainless Steel appeared.

Tableware made of Stainless Steel meant people no longer had to worry about the taste of rust tainting their food.

Even the most commonly used razor blades are made of Stainless Steel.

This is a classic example of an accidental breakthrough in the field of materials science.

There is even a saying circulating online.

The speed of light is theoretically unbreakable.

But is there a possibility that humanity's technology tree simply branched in the wrong direction?

In reality, the prerequisites for faster-than-light (FTL) engine technology might be so simple that even medieval technology could have built an FTL ship.

It's just that humanity took the wrong path; no one ever thought in that direction or considered the possibility.

Based on this idea, a very interesting science fiction novel appeared, titled 'Eight Billion Mad Dogs Charging Out of Earth'.

Before Su Dingping crossed over, there was an extremely famous case of academic fraud.

Scientists from the nation of his previous life suddenly claimed one day that they had manufactured a Room-Temperature Superconducting Material.

It goes without saying what room-temperature superconductors would mean.

The technological value it represents is not inferior to Controllable Nuclear Fusion at all.

In fact, if Room-Temperature Superconducting Materials could really be prepared, then the realization of Controllable Nuclear Fusion wouldn't be far off.

Even the scenes you've seen in any past science fiction movie would be just around the corner on Earth.

And the synthesis method provided by those scientists from the nation was outrageously simple.

So simple that even in the Middle Ages over a thousand years ago, one could have fired up a room-temperature superconductor in any workshop with a furnace!

But until the experiments were actually completed and the fraud was thoroughly exposed, no one dared to guarantee with absolute certainty that the synthesis idea provided by those scientists was wrong!

Because breakthroughs in materials science are just that irrational, just that simple.

Back when he was developing the stealth coating for the sixth generation fighter jet, Su Dingping had used Graphene.

Who would have thought that this single-molecule structure material was originally peeled off using adhesive tape?

So, while these words sounded quite outrageous, no one spoke up to refute Su Dingping's statement.

Su Dingping opened his laptop and brought up a brand-new interface.

This was a set of academic charts, covered in numerous complex formulas and many crystal structure diagrams.

Some experts could even see the hidden Quantum Chemistry calculation results within them.

"Before introducing this material, we must first understand the difficulties in synthesizing it."

"Then, based on these difficulties, we proceed with trial and error, bit by bit, to slowly solve them."

Su Dingping explained slowly.

"First, the first difficulty we face is the precise control of structural order across scales."

"Because our requirements for the material are extremely high, we need to control the distribution of multiple different elements on a scale from nanometers to micrometers."

"Even their lattice orientations!"

"Traditional methods like Epitaxial Growth, Ion Implantation, and Powder Metallurgy cannot actually achieve this level of precision adjustment across such a large scale and with complex components!"

"I already have an idea regarding this point."

A phrase jumped out of Su Dingping's mouth.

"Atomic-level physical vapor deposition guided by ultra-strong magnetic fields combined with laser interference patterning."

After speaking, Su Dingping gave everyone present a little time to digest what he had just said.

Although the terms he used were somewhat obscure, everyone present was a big shot in their respective fields and could more or less understand them.

It had to be said that he had indeed provided a very unique approach.

Because up until now, no one had spoken up to refute him.

"I have designed a device that can generate a continuous, ultra-strong steady-state magnetic field."

"Of course, because certain specific components of this device require superconducting materials, the maintenance cost of this device will be quite high."

"This also means that the cost of the final product we manufacture may be difficult to control."

"However, in the face of technology like Controllable Nuclear Fusion reactors, I believe these costs can be ignored."

Seeing that the crowd was unwilling to refute his words, Su Dingping continued his introduction.

"...This device performs... during the deposition process, then carries out precise spatial deflection and energy screening... Meanwhile, multiple femtosecond laser beams are used in... this..."

"Ultimately, they will grow into the gradient heterostructure we designed!"

"In essence, we are extending the concept of atomic manufacturing directly into the field of macroscopic functional materials."

Su Dingping paused for a moment, leaving time for everyone to digest and absorb.

This was just an introduction to his design concept; there was no need to discuss the technical details too deeply.

He only needed everyone to know that the design concept he proposed was sound.

"Second is Neutron transmutation catalyzed self-organization."

"This is..."

"During the material growth process, we need to introduce... local changes..."

"The main difficulty lies in how to precisely control the neutron field and how to ensure the material remains non-destructive?"

"Regarding this point, I also have some ideas."

"Based on... an integrated design is conducted."

"This is a coupled system..."

"I plan to surround the vacuum chamber where the material grows with miniaturized neutron generation targets..."

"Using... directional irradiation... to drive atoms to diffuse and reorganize according to the paths we have calculated..."

This seemingly whimsical design approach actually gained the approval of quite a few people.

In all fairness, although Su Dingping's ideas were bold and abrupt, thinking carefully, they indeed possessed significant feasibility.

"Finally, and most importantly, how do we ensure real-time characterization and feedback control in extreme environments?"

"During the production process, we must monitor every detail of the material's growth in real-time to facilitate timely parameter adjustments."

"If we cannot achieve this, it could very likely lead to a low yield rate for the final product."

For such precise instruments and materials, once a slightly larger error occurs, the final product is likely to be scrapped immediately.

Cost is a minor issue.

The key is that if the yield rate cannot be guaranteed, it's very possible that out of 10 or even 100 batches of material produced, only one or two will be usable.

This would cause the time cost to remain high and would greatly limit the expansion of Controllable Nuclear Fusion technology.

After all, production capacity is limited; even if you build the Controllable Nuclear Fusion reactors, they won't start without the critical materials.

"This point brings us to the most popular topic in our country right now: Artificial Intelligence."

Someone frowned slightly.

"Chief Engineer Su, I understand your thinking, and I must admit that Artificial Intelligence is indeed a system that perfectly meets our current needs."

"But if we have to resort to Artificial Intelligence for everything, then such behavior... is it not a bit dangerous?"

"To me, Artificial Intelligence is just a tool,"

Su Dingping said indifferently.

"You and I both know that with current Artificial Intelligence technology—no, even with Artificial Intelligence technology decades from now—it is impossible for true Artificial General Intelligence (AGI) to emerge."

What is Artificial General Intelligence?

Simply put, an AI that is no different from a human in terms of emotions is called AGI.

Moreover, the learning ability and knowledge reserves of such an AI would be stronger than a human's in 99% of cases.

Once such an AI possesses its own emotions, it would only view humans as lower evolved animals.

In the end, the fate awaiting humanity would be tragic.

This is particularly prominent in works of fiction.

For example, the T-800 in 'The Terminator', or the Agents in 'The Matrix'...

The main reason Su Dingping wasn't worried about AI causing this or that problem was that, given current technological levels, developing true AGI was simply impossible.

As it turns out, human imagination is actually quite lacking.

In science fiction movies from the last century, the computing power of Skynet, which destroyed all of humanity, was only 60 trillion floating-point operations per second (FLOPS).

That number was indeed astronomical at the time.

But today, the computing power of a single RTX 4090 graphics card has already reached 100 trillion operations per second.

In other words, the computing power of Skynet was only equivalent to 0.6 of an RTX 4090!

Unless true Quantum Computers come into existence and there are major breakthroughs in other areas,

based on current technological levels, the emergence of AGI is basically impossible.

"I am not talking about so-called AGI,"

the person replied.

"I am saying that Artificial Intelligence technology is not yet mature. If a programming error occurs, it could very likely lead to the complete collapse of our entire production chain."

"In such a situation, is it really necessary to take the risk of using Artificial Intelligence?"

"We cannot stop using a technology simply because it is not yet mature,"

Su Dingping said slowly.

"Furthermore, I believe that it is precisely through continuous use that Artificial Intelligence technology can develop faster, become more mature, and be used with greater confidence!" (End of Chapter)