Even with a treasure-grade refining furnace, He Xiangyang still took three years to barely soften the guangyao gold.

Next, He Xiangyang successively began to put time sand and some auxiliary materials into the refining furnace.

As time went on, the guangyao gold had become even softer and more ductile.

However, because guangyao gold itself was extremely hard, this was pretty much the limit of the treasure refining furnace.

And other materials, including time sand, had already turned into liquid.

He Xiangyang did not first melt the time sand into the guangyao gold.

Instead, He Xiangyang first melted the Cosmic Water into the guangyao gold, first increasing the Time Origin Law contained within the guangyao gold.

Then, he combined the time sand with Millennium Light, so that the time sand also contained a trace of the Law of the Origin of Light.

Only then did He Xiangyang begin to gradually combine the time sand with the guangyao gold.

He Xiangyang was very careful with this step.

Because He Xiangyang needed to balance the Light and Time Origin Laws contained in the time sand and guangyao gold.

If he did not balance them well, at best, he would fail when engraving the Light-Time Fusion Law secret patterns later.

At worst, the materials would collapse now, or even explode, rendering all previous efforts futile.

Fortunately, He Xiangyang had accumulated some experience in material fusion when he refined immortal divine weapons before.

Soon, He Xiangyang combined the guangyao gold and time sand.

Next, He Xiangyang melted some other auxiliary materials into the metal in the center of the refining furnace.

After doing all this, He Xiangyang could clearly feel that the metal in the refining furnace, under the fusion of various materials,

The Light and Time Origin Laws fluctuations within the metal became stronger.

This was the result of the main treasure material and other auxiliary materials combining and promoting each other.

Moreover, the fluctuations of the Light and Time Origin Laws were in a relatively balanced state.

However, He Xiangyang did not relax.

Because, currently, only the first step of refining the treasure had been completed.

The next few steps were also very difficult.

The next step was shaping.

He Xiangyang needed to forge the metal mass in the refining furnace into a sword.

This was not simple blacksmithing.

The metal mass in the refining furnace was formed by the combination of multiple materials.

Although the Light and Time Origin Laws within it were in a balanced state.

However, the secret patterns representing the Light and Time Origin Laws in the various materials were intertwined.

The secret patterns inside the current metal mass were like a tangled ball of yarn.

He Xiangyang needed to straighten out the secret patterns during the forging process.

Not only that, He Xiangyang also had to make the secret patterns inside as suitable as possible for engraving the secret patterns of the light-time sword.

One could say He Xiangyang needed to first straighten out a tangled ball of yarn and turn it into a ball of yarn.

Then, He Xiangyang also had to slowly knit this ball of yarn into a sweater.

And engraving secret patterns was like drawing patterns on a sweater.

Therefore, the forging step was no simpler than combining the materials.

In fact, it was even more difficult.

He Xiangyang extended his spiritual power into the refining furnace.

It contained terrifying law fluctuations and terrifying high temperatures.

He Xiangyang's spiritual power was not very strong due to his low cultivation level.

So He Xiangyang's spiritual power was constantly being annihilated by the refining furnace.

This forced He Xiangyang to consume a large amount of energy to maintain his spiritual power for probing.

However, this was also something He Xiangyang had to do.

He Xiangyang's spiritual power penetrated deep into the refining furnace at this moment to examine the secret patterns within the metal mass.

He Xiangyang had to first understand the situation of the secret patterns before he could straighten them out in the subsequent forging process.

He Xiangyang's energy consumption at this moment was extremely terrifying, as if it cost nothing.

Fortunately, the Duobao Small World simulated real-world situations.

He Xiangyang currently had not only his main body in the Duobao Small World, but also the Life Ancient Tree Clone attached to his main body.

When performing World Lord Rank trial missions, He Xiangyang's three clones would all be teleported to the Duo Bao World.

After completing the World Lord Rank trial missions, the teleportation back location was also the place of arrival.

However, He Xiangyang's original nucleus remained in the Blood Origin Secret Realm.

So He Xiangyang was not afraid of large energy consumption now.

Soon, He Xiangyang, relying on his powerful comprehension of the Light and Time Origin Laws, finished probing the secret patterns in the metal mass within the refining furnace.

He Xiangyang simulated the secret patterns inside the metal mass in his mind.

Then, He Xiangyang began to think about the forging plan.

Where to start, how much force to use during the process.

Also, how much Light and Time Origin Laws needed to be used during the forging process.

And when to use a portion of the Light-Time Fusion Law to give the metal mass the foundation of the Light-Time Fusion Law.

He Xiangyang had to consider all these steps clearly.

Because only by forging the metal mass more perfectly could He Xiangyang engrave the secret patterns more easily and have a higher success rate.

If there was even a slight error in the forging process, the success rate of engraving the secret patterns would be even lower.

Even if it might just be a slight increase in force during a single swing of the forging hammer.

It could increase the chance of failure by one point.

Therefore, He Xiangyang now needed to perfect the forging plan as much as possible in his mind.

There was no specific method for this step.

After all, differences in materials, differences in refining, and many other variables would make the metal mass even more different.

Therefore, even in "Thousand Refinements," there was no forging plan.

This step could only rely on experience.

He Xiangyang spent a full five years thinking about this plan.

During these five years, He Xiangyang thought of countless plans.

And He Xiangyang simulated every possible error for each plan.

Then, after He Xiangyang calculated the final outcome of each plan,

Finally, He Xiangyang settled on the final forging plan.

After finalizing the forging plan, He Xiangyang stopped thinking and took out the treasure forging hammer.

He Xiangyang specifically chose a forging hammer that contained the Light and Time Origin Laws.

This way, it could better fit the materials.

Next, He Xiangyang familiarized himself with the forging hammer, then took out the metal mass and began to forge it.

He Xiangyang had to put the metal mass back into the refining furnace to soften it after forging for a period of time.

Every time He Xiangyang swung the forging hammer, he consumed a huge amount of energy, combined with the Light and Time Origin Laws.

He slowly forged the prototype of the metal sword.

During this process, He Xiangyang also had to use the Light and Time Origin Laws.

He gradually straightened out the secret patterns of the Light and Time Origin Laws in the metal mass.

As time passed, the metal sword gradually took shape.

Moreover, the secret patterns in the sword gradually became regular, no longer chaotic as before.

He Xiangyang had been forging for more than ten years.

During these ten years, He Xiangyang dared not slack off in the slightest, always keeping his nerves taut.